BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//ISA - Houston Section - ECPv6.15.18//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://www.houstonisa.org
X-WR-CALDESC:Events for ISA - Houston Section
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Chicago
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20180311T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20181104T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20190310T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20191103T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20200308T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20201101T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20210314T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20211107T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20220313T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20221106T070000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20211004T080000
DTEND;TZID=America/Chicago:20211008T170000
DTSTAMP:20260424T110942
CREATED:20210728T173219Z
LAST-MODIFIED:20210728T173426Z
UID:10000025-1633334400-1633712400@www.houstonisa.org
SUMMARY:Technician Training Boot Camp (TTBC)
DESCRIPTION:5-Day Intensive Hands-on Training Curriculum \n\nInstrumentation Basics\nCalibration and Maintenance\nDigital (Smart) Transmitters\nControl Valves\, Positioners\, and DVCs\nTuning and Troubleshooting Control Systems\n\nDays: 4.5 \nCEUs: 3.6 \nPDHs: 36 \nISA Technician Training Boot Camp combines a unique technical training course with minimum lecture and maximum hands-on experience. Over 75% of your time will be spent on equipment labs! \nThis week of intensive training will cover a broad range of technical topics needed to get the job done right. Starting with basic instrumentation fundamentals and ending with the advanced and ultimate in smart technology\, this comprehensive program will serve as a vital building block to your professional development and skills enhancement efforts. This course also serves as a solid introduction to other ISA courses that will help you advance your automation and control career. \nThis course focuses on the knowledge required by a control systems technician with five years’ experience in performing maintenance\, calibration and troubleshooting tasks typical of a plant floor environment. It will test an individual’s skill sets and serve as a self-assessment of additional training needs and will: \n\nProvide a review of industrial measurement and control concepts and terminology\nReview and Refresh present skills\nIntroduce new skills\n\nWho Should Attend? \n\nTechnicians with instrument maintenance responsibilities\, and a good working knowledge of instrument fundamentals and terminology.\nInstrument supervisors needing to understand and evaluate the skill sets required to perform instrument maintenance tasks.\nReliability and maintenance engineers needing to learn and/or evaluate instrument maintenance processes.\n\n  \nCourse Objectives \n\nProvide an overview of industrial measurement and control in order to communicate appropriately with other control system professionals\nDefine a process to properly tune control loops\nPresent a systematic approach for troubleshooting and start-up of single- and multi-loop control loops to maintain good process control systems\nDescribe the operation and maintenance of pneumatic instruments employed in modern process facilities with an emphasis on valves\, positioners\, controllers\, and transmitters\nPerform proper installation\, calibration\, and maintenance of electronic instruments\nDeliver a working knowledge of smart field devices including both digital transmitters and digital valve controllers\n\nDAY 1: Instrumentation Basics \nYou Will Cover: \n\nConventional analog field devices: Sensor Technologies | Measurement Fundamentals | Standard Signals\nLoop Characteristics: Current Loop | Power Source\nSmart Field Devices: Current Practice | Typical Smart D/P Transmitter | Configurations\n\nClassroom/Laboratory Exercises: \n\nCalibrate process measurement devices\nCurrent loop construction and measurements\nConfigure smart transmitters\n\nYou Will Be Able To: \n\nDescribe the operation of a pneumatic differential pressure transmitters\nCalibrate a pneumatic d/p transmitter\nDescribe the operation of the 4-20 ma current loop\nPerform voltage and current measurements in a 4-20 ma current loop\nDescribe the operation of an electronic differential pressure transmitter\nCalibrate an electronic d/p transmitter\nDescribe the configuration process for a digital transmitter\nConfigure a digital transmitter\n\nDAY 2: Calibration and Maintenance \nYou Will Cover: \n\nTemperature Measurements and Sensor Fundamentals\nD/P Level Applications: Hydrostatic Head Level Measurement | Bubbler Level Measurement | Level Transmitter | Open and Closed Tank Installation | Remote Seals\nCalibration and Configuration: Configuring Smart Temperature Transmitters\n\nClassroom/Laboratory Exercises: \n\nCalculate span and range values for various level measurement applications\nCalibrate differential pressure\, RTD\, and thermocouple transmitters\nView a three-wire RTD demonstration and identify errors\nD/P Liquid Level Measurement with elevation/suppression applications\n\nYou Will Be Able To: \n\nConnect various transmitters for measurements of level\, flow\, and temperature\nCalculate measurement ranges for d/p level applications\nCalibrate various d/p transmitters for level measurements\nDescribe temperature measurements utilizing various sensors and transmitters\nCalibrate various temperature transmitters utilizing various sensors\n\nDAY 3: Digital (Smart) Transmitters \nYou Will Cover: \n\nAnalog vs. Digital Instruments: Analog Limitations | Calibration of Analog vs. Digital Instruments\nSerial Digital Communications: Modem | FSK | Protocol\nHART™ Communication: Features | Master/Slave | Point-to-Point | Capabilities of HART\n\nClassroom/Laboratory Exercises: \n\nConfigure digital transmitters and digital valve controllers and control valves\nPerform sensor trims and calibrations\nUse various communication tools to configure smart field devices\n\nYou Will Be Able To: \n\nDifferentiate between analog and digital instruments\nConfigure\, re-range\, and calibrate smart/digital field devices\nCommunicate with digital devices utilizing computer-based software\n\nDay 4: Control Valves\, Positioners\, and DVCs \nYou Will Cover: \n\nAnalog Positioners:  Operation of Analog Positioners | Calibration\nSmart Control Valves: Digital Positioners | Diagnostic Tools | Control Valve Tuning\nDiagnostics: Features | Capabilities\n\nClassroom/Laboratory Exercises: \n\nCalibrate and split-range analog positioners\nConfigure\, calibrate\, and split-range DVCs\nUse various communication tools to configure DVCs\nPerform diagnostic tests on smart control valves\n\nYou Will Be Able To: \n\nDifferentiate between analog and digital positioners\nConfigure\, split-range\, and calibrate analog positioners\nConfigure and calibrate control valves fitted with digital valve controllers\nCommunicate with DVCs utilizing computer-based software\nTest diagnostic capabilities of digital valve controllers\n\nDay 5: Tuning and Troubleshooting Control Systems \nYou Will Cover: \n\nReview of Feedback Control Concepts and Components: History of Control Operation | Concepts | Pictorial Representation | Disturbances in the Loop\nControl Modes: Proportional | Integral | Derivative\nIntroduction to Troubleshooting: Purpose of Troubleshooting | Reasons for Troubleshooting\nApproaches to Troubleshooting: Equipment History | Input/Output (Serial) | Shotgun Approach | Logical Analysis\nLogical Analysis Troubleshooting: Verify | Identify | Repair | Test | Follow-up on Problems\n\nClassroom/Laboratory Exercises: \n\nDemonstrate the operation of components required for closed loop control\nTune feedback control loops via a number of different methods\nTune using PC-based simulation software\nObserve operation and tuning of a feedback control loop\nDiagnose and solve problems with single-loop control loops\nTroubleshoot several single control loop problems\n\nYou Will Be Able To: \n\nDefine the concepts of PID control\nExplain component operation in a closed loop control system\nUse the trial-and-error methods to tune a control system for stated quality control\nDevelop a systematic approach to troubleshooting\nIdentify why a systematic approach to troubleshooting is most effective\nFollow specified procedures for proper loop check-out\nVerify\, locate\, and identify performance problems and the causes of the problems\n\nCourse Resources (included with registration) \nTextbook: Measurement and Control Basics\, Fifth Edition \nBy Thomas A. Hughes \nMore Ways to Learn \nWant to learn more about the topic? Check out these resources. \n  \nCalibration: A Technician’s Guide  \nBy Mike Cable \nFundamentals of Process Control Theory\, Third Edition \nby P.W. Murrill \nTroubleshooting: A Technician’s Guide\, Second Edition  \nBy William L. Mostia\, Jr.\, P.E.
URL:https://www.houstonisa.org/event/technician-training-boot-camp-ttbc-3/
LOCATION:Kenexis\, 15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418\, Houston\, TX\, 77079-2418\, United States
CATEGORIES:Training,Technical-Training
ORGANIZER;CN="Glen Wood":MAILTO:glnwd15@gmail.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20201028T080000
DTEND;TZID=America/Chicago:20201029T160000
DTSTAMP:20260424T110942
CREATED:20200209T223539Z
LAST-MODIFIED:20201002T162146Z
UID:10000106-1603872000-1603987200@www.houstonisa.org
SUMMARY:EC54 – Advanced Design & SIL Verification (October 2020)
DESCRIPTION:Location: \nKenexis\n15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418 \nDate: \nOctober 28-29\, 2020 \nCourse Hours: 8:00 a.m.-4:00 p.m. \nDescription:\nThis course focuses on more detailed design issues and further hands-on examples of system analysis/modeling. Students will be better able to perform system design and analysis thus saving their companies time and money in optimizing system designs. This course will enable you to analyze any system technology and configuration to see if it will meet the required SIL (Safety Integrity Level) and determine if existing systems are safe enough\, if they need to be upgraded\, and whether proposed systems will meet the performance requirements. You will also be able to determine the optimum manual test interval for any system\, saving your company time and money by not over- or under-testing systems. \nCertificate Program: This course is required for the ISA84 Safety Instrumented Systems Certificate Program 3. You can register for the course only or for the certificate program which includes course and exam. ISA Course Safety Instrumented Systems-Design\, Analysis\, and Justification (EC50) or Safety Instrumented Systems: Design\, Analysis\, and Justification (EC50E) and ISA Certificate Safety Instrumented Systems Certificate Program 1 are prerequisites for Certificate Program 3. Those who successfully complete this course and pass the certificate program exam receive the designation of ISA84 SIL Verification Specialist. \nYou will be able to:\n\nAnalyze any system technology and configuration to see if it will meet the required SIL (Safety Integrity Level)\nDetermine if existing systems are safe enough (or whether they need to be upgraded) and whether proposed systems will meet the performance requirements\nDetermine the optimum manual test interval for any system\, saving your company time and money by not over or under-testing systems\n\nYou will cover:\n\nSystem Modeling/Analysis Hands-On Advanced Examples: Multiple Examples with Different Field Device Technologies | Configurations | Diagnostic Levels | Test Intervals | Common Cause Factors | Imperfect Manual Testing\nDetailed Design Topics: Fault Tolerance | Safe Failure Fraction | Diagnostic Coverage | Confidence Limits | System Response to Faults | Using Devices for Control and Safety | Non-Fail-Safe Design Requirements | Interface Requirements\n\n For more information: \nhttps://www.isa.org/products/advanced-design-and-sil-verification-ec54
URL:https://www.houstonisa.org/event/ec54-advanced-design-sil-verification-3/
LOCATION:Kenexis\, 15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418\, Houston\, TX\, 77079-2418\, United States
CATEGORIES:Training,Safety
ORGANIZER;CN="Jacqueline Buskop":MAILTO:jbuskop@wesleyan.edu
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20201026T080000
DTEND;TZID=America/Chicago:20201027T160000
DTSTAMP:20260424T110942
CREATED:20200209T223429Z
LAST-MODIFIED:20201002T162128Z
UID:10000086-1603699200-1603814400@www.houstonisa.org
SUMMARY:EC52 – Advanced Safety Integrity Level (SIL) Selection (October 2020)
DESCRIPTION:Location: \nKenexis\n15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418 \nDate: \nOctober 26-27\, 2020 \nCourse Hours: 8:00 a.m.-4:00 p.m. \nDescription:\nThis course focuses on further hands-on examples of Safety Integrity Level (SIL) selection using a variety of different techniques and providing more insight into the factors that determine risk reduction requirements. Students will be better able to save their companies time and money through the optimization of system performance requirements. This builds upon the foundation set in ISA’s EC50 (Safety Instrumented Systems-Design\, Analysis\, and Justification). \nCertificate Program: This course is required for the ISA84 Safety Instrumented Systems Certificate Program 2. When you register for the course\, the certificate exam is included with your registration.ISA Course Safety Instrumented Systems-Design\, Analysis\, and Justification (EC50) or Safety Instrumented Systems: Design\, Analysis\, and Justification (EC50E) and ISA Certificate Safety Instrumented Systems Certificate Program 1 are prerequisites for Certificate Program 2. Those who successfully complete this course and pass the exam receive the designation of ISA84 SIL Selection Specialist. \n\nYou will be able to:\nDevelop and implement different SIL selection techniques within your organization\, including the risk matrix\, risk graph\, and LOPA (Layer of Protection Analysis)\, in order to determine the appropriate level of performance needed of your safety systems. This will prevent you from over or under designing the system requirements and will save your organization time and money. \nYou will cover:\n\nPrevention of System Requirements Over- or Under-Design\nDetermination of the Appropriate Level of Performance Needed for Your Safety Systems\nSafety Integrity Level (SIL) Selection Hands-on Examples: 3-Dimensional Risk Matrix | Risk Graph | LOPA (Layer of Protection Analysis) | Modified (implicit) LOPA\n\n  \nFor more information: \nhttps://www.isa.org/products/advanced-safety-integrity-level-sil-selection-ec52
URL:https://www.houstonisa.org/event/ec52-advanced-safety-integrity-level-sil-selection-3/
LOCATION:Kenexis\, 15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418\, Houston\, TX\, 77079-2418\, United States
CATEGORIES:Training,Safety
ORGANIZER;CN="Jacqueline Buskop":MAILTO:jbuskop@wesleyan.edu
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20201019T080000
DTEND;TZID=America/Chicago:20201023T170000
DTSTAMP:20260424T110942
CREATED:20200228T154226Z
LAST-MODIFIED:20201002T162100Z
UID:10000044-1603094400-1603472400@www.houstonisa.org
SUMMARY:EC50 - Safety Instrumented Systems: A Life- Cycle Approach (October 2020)
DESCRIPTION:Description: \nThis course focuses on the engineering requirements for the specification\, design\, analysis\, and justification of safety instrumented systems for the process industries. Students will learn how to determine safety integrity levels and evaluate whether proposed or existing systems meet the performance and documentation requirements defined in the ISA84 (IEC 61511) standard. \nThis course is required for the ISA84 Safety Instrumented Systems Certificate Programs. Your course registration includes your registration for the exam. Those who successfully complete this course and pass the exam receive the designation of ISA84 SIS Fundamentals Specialist. \nYou will be able to: \n\nDifferentiate between process control and safety control\nImplement the ISA84 (IEC 61511) standard\nEvaluate process risk levels\nSelect Safety Integrity Levels (SILs) for Safety Instrumented Functions (SIFs) using a variety of techniques\nAnalyze the performance of different logic system technologies\nAnalyze the performance of various sensor\, logic\, and final element configurations\, as well as the impact of diagnostics\, test intervals\, common cause\, system size\, imperfect manual testing\, and bypassing\nDetermine optimum system test intervals\nSpecify and select safety instrumented systems\nApply the documentation requirements for process safety management\, regulations\, and industry standards\n\nFor More Information: \nhttps://www.isa.org/products/safety-instrumented-systems-a-life-cycle-appro-2
URL:https://www.houstonisa.org/event/ec50-safety-instrumented-systems-a-life-cycle-approach-october-2020-tx/
LOCATION:Kenexis\, 15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418\, Houston\, TX\, 77079-2418\, United States
CATEGORIES:Training,Safety
ORGANIZER;CN="Jacqueline Buskop":MAILTO:jbuskop@wesleyan.edu
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20201012T080000
DTEND;TZID=America/Chicago:20201016T170000
DTSTAMP:20260424T110942
CREATED:20200209T223218Z
LAST-MODIFIED:20201002T162244Z
UID:10000089-1602489600-1602867600@www.houstonisa.org
SUMMARY:AEST – Automation Engineering Survival Training (October 2020)
DESCRIPTION:Location: \nKenexis\n15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418 \nDate: \nOctober 12-16\, 2020 \nCourse Hours: 8:00 a.m.-5:00 p.m. Monday-Thursday and 8:00 a.m.-12:00 p.m. Friday \nDo you have what it takes to survive in the world of process automation?\nSharpen your process automation know-how with this intensive week of expert-led lecture and hands-on exercises covering practical\, real-world automation survival skills. \nAutomation Engineering Survival Training is a unique process automation engineering experience designed to hone your process automation knowledge and skills. This intensive technical training boot camp for automation engineers combines lecture and hands-on labs with bonus features\, including a plant tour\, to maximize your learning experience. \nISA’s seasoned “Survival Expert” will guide you through a fast-paced and rigorous course of topics from process measurement fundamentals through advanced automation\, and everything in between! This course also serves as a solid introduction to other ISA engineering courses that can assist in the advancement of your process engineering career. \nWho should attend?\n\nNew automation\, control system\, or process control engineers\nRecent process engineering and other engineering graduates\nSeasoned engineers looking to refresh their process automation knowledge and skills\nIndividuals wanting to learn more about process automation.\n\nWatch our Survival Training video on YouTube!\nhttp://www.youtube.com/watch?v=WbK-mXtWnxE \n  \n  \nFor more information: \nhttps://www.isa.org/products/automation-engineering-survival-training-aest
URL:https://www.houstonisa.org/event/aest-automation-engineering-survival-training-4/
LOCATION:Kenexis\, 15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418\, Houston\, TX\, 77079-2418\, United States
CATEGORIES:Training,Technical-Training
ORGANIZER;CN="Jacqueline Buskop":MAILTO:jbuskop@wesleyan.edu
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20201005T080000
DTEND;TZID=America/Chicago:20201009T170000
DTSTAMP:20260424T110942
CREATED:20200209T223040Z
LAST-MODIFIED:20200925T052349Z
UID:10000091-1601884800-1602262800@www.houstonisa.org
SUMMARY:TTBC - Technician Training Boot Camp (October 2020 - TX\, IN PERSON)
DESCRIPTION:Location: \nKenexis\n15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418 \nDate: \nOctober 5-9\, 2020 \nCourse Hours: \n8:00 a.m.-5:00 p.m. Monday-Thursday and 8:00 a.m.-12:00 p.m. Friday \nDescription: \nISA Technician Training Boot Camp combines a unique technical training course with minimum lecture and maximum hands-on experience. Over 75% of your time will be spent on equipment labs! \nThis week of intensive training will cover a broad range of technical topics needed to get the job done right. Starting with basic instrumentation fundamentals and ending with the advanced and ultimate in smart technology\, this comprehensive program will serve as a vital building block to your professional development and skills enhancement efforts. This course also serves as a solid introduction to other ISA courses that will help you advance your automation and control career. \nThis course focuses on the knowledge required by a control systems technician with five years’ experience in performing maintenance\, calibration and troubleshooting tasks typical of a plant floor environment. It will test an individual’s skill sets and serve as a self-assessment of additional training needs and will: \n\nProvide a review of industrial measurement and control concepts and terminology\nReview and Refresh present skills\nIntroduce new skills\n\nWho should attend? \n\nTechnicians with instrument maintenance responsibilities\, and a good working knowledge of instrument fundamentals and terminology.\nInstrument supervisors needing to understand and evaluate the skill sets required to perform instrument maintenance tasks.\nReliability and maintenance engineers needing to learn and/or evaluate instrument maintenance processes.\n\nObjectives: \n\nProvide an overview of industrial measurement and control in order to communicate appropriately with other control system professionals\nDefine a process to properly tune control loops\nPresent a systematic approach for troubleshooting and start-up of single- and multi-loop control loops to maintain good process control systems\nDescribe the operation and maintenance of pneumatic instruments employed in modern process facilities with an emphasis on valves\, positioners\, controllers\, and transmitters\nPerform proper installation\, calibration\, and maintenance of electronic instruments\nDeliver a working knowledge of smart field devices including both digital transmitters and digital valve controllers\n\n  \nFor more information: \nhttps://www.isa.org/products/technician-training-boot-camp-ttbc
URL:https://www.houstonisa.org/event/ttbc-technician-training-boot-camp-2/
LOCATION:Kenexis\, 15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418\, Houston\, TX\, 77079-2418\, United States
ORGANIZER;CN="Jacqueline Buskop":MAILTO:jbuskop@wesleyan.edu
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20200624T080000
DTEND;TZID=America/Chicago:20200625T160000
DTSTAMP:20260424T110942
CREATED:20200209T221651Z
LAST-MODIFIED:20200523T065759Z
UID:10000092-1592985600-1593100800@www.houstonisa.org
SUMMARY:EC54 - Advanced Design & SIL Verification (June 2020)
DESCRIPTION:Location: \nKenexis\n15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418 \nDate: \nJune 24-25\, 2020 \nCourse Hours: 8:00 a.m.-4:00 p.m. \nDescription:\nThis course focuses on more detailed design issues and further hands-on examples of system analysis/modeling. Students will be better able to perform system design and analysis thus saving their companies time and money in optimizing system designs. This course will enable you to analyze any system technology and configuration to see if it will meet the required SIL (Safety Integrity Level) and determine if existing systems are safe enough\, if they need to be upgraded\, and whether proposed systems will meet the performance requirements. You will also be able to determine the optimum manual test interval for any system\, saving your company time and money by not over- or under-testing systems. \nCertificate Program: This course is required for the ISA84 Safety Instrumented Systems Certificate Program 3. You can register for the course only or for the certificate program which includes course and exam. ISA Course Safety Instrumented Systems-Design\, Analysis\, and Justification (EC50) or Safety Instrumented Systems: Design\, Analysis\, and Justification (EC50E) and ISA Certificate Safety Instrumented Systems Certificate Program 1 are prerequisites for Certificate Program 3. Those who successfully complete this course and pass the certificate program exam receive the designation of ISA84 SIL Verification Specialist. \nYou will be able to:\n\nAnalyze any system technology and configuration to see if it will meet the required SIL (Safety Integrity Level)\nDetermine if existing systems are safe enough (or whether they need to be upgraded) and whether proposed systems will meet the performance requirements\nDetermine the optimum manual test interval for any system\, saving your company time and money by not over or under-testing systems\n\nYou will cover:\n\nSystem Modeling/Analysis Hands-On Advanced Examples: Multiple Examples with Different Field Device Technologies | Configurations | Diagnostic Levels | Test Intervals | Common Cause Factors | Imperfect Manual Testing\nDetailed Design Topics: Fault Tolerance | Safe Failure Fraction | Diagnostic Coverage | Confidence Limits | System Response to Faults | Using Devices for Control and Safety | Non-Fail-Safe Design Requirements | Interface Requirements\n\n For more information and to register online: \nhttps://www.isa.org/events-conferences/events-calendar/event-details/?productId=66344142
URL:https://www.houstonisa.org/event/ec54-advanced-design-sil-verification-2/
LOCATION:Kenexis\, 15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418\, Houston\, TX\, 77079-2418\, United States
CATEGORIES:Training,Cyber-Security
ORGANIZER;CN="Magda Moreno":MAILTO:magda.moreno.v@outlook.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20200622T080000
DTEND;TZID=America/Chicago:20200623T160000
DTSTAMP:20260424T110942
CREATED:20200209T221528Z
LAST-MODIFIED:20200523T065751Z
UID:10000094-1592812800-1592928000@www.houstonisa.org
SUMMARY:EC52 - Advanced Safety Integrity Level (SIL) Selection (June 2020)
DESCRIPTION:Location: \nKenexis\n15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418 \nDate: \nJune 22-23\, 2020 \nCourse Hours: 8:00 a.m.-4:00 p.m. \nDescription:\nThis course focuses on further hands-on examples of Safety Integrity Level (SIL) selection using a variety of different techniques and providing more insight into the factors that determine risk reduction requirements. Students will be better able to save their companies time and money through the optimization of system performance requirements. This builds upon the foundation set in ISA’s EC50 (Safety Instrumented Systems-Design\, Analysis\, and Justification). \nCertificate Program: This course is required for the ISA84 Safety Instrumented Systems Certificate Program 2. When you register for the course\, the certificate exam is included with your registration.ISA Course Safety Instrumented Systems-Design\, Analysis\, and Justification (EC50) or Safety Instrumented Systems: Design\, Analysis\, and Justification (EC50E) and ISA Certificate Safety Instrumented Systems Certificate Program 1 are prerequisites for Certificate Program 2. Those who successfully complete this course and pass the exam receive the designation of ISA84 SIL Selection Specialist. \n\nYou will be able to:\nDevelop and implement different SIL selection techniques within your organization\, including the risk matrix\, risk graph\, and LOPA (Layer of Protection Analysis)\, in order to determine the appropriate level of performance needed of your safety systems. This will prevent you from over or under designing the system requirements and will save your organization time and money. \nYou will cover:\n\nPrevention of System Requirements Over- or Under-Design\nDetermination of the Appropriate Level of Performance Needed for Your Safety Systems\nSafety Integrity Level (SIL) Selection Hands-on Examples: 3-Dimensional Risk Matrix | Risk Graph | LOPA (Layer of Protection Analysis) | Modified (implicit) LOPA\n\n  \nFor more information and to register online: \nhttps://www.isa.org/events-conferences/events-calendar/event-details/?productId=66344077
URL:https://www.houstonisa.org/event/ec52-advanced-safety-integrity-level-sil-selection-2/
LOCATION:Kenexis\, 15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418\, Houston\, TX\, 77079-2418\, United States
CATEGORIES:Training,Cyber-Security
ORGANIZER;CN="Magda Moreno":MAILTO:magda.moreno.v@outlook.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20200615T080000
DTEND;TZID=America/Chicago:20200619T160000
DTSTAMP:20260424T110942
CREATED:20200209T221404Z
LAST-MODIFIED:20200523T065735Z
UID:10000016-1592208000-1592582400@www.houstonisa.org
SUMMARY:EC50 - Safety Instrumented Systems: A Life- Cycle Approach (June 2020)
DESCRIPTION:Location: \nKenexis\n15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418 \nDate: \nJune 15-19\, 2020 \nCourse Hours: 8:00 a.m.-4:00 p.m. Monday-Thursday and 8:00 a.m.-12:00 p.m. Friday \nDescription: \nThis course focuses on the engineering requirements for the specification\, design\, analysis\, and justification of safety instrumented systems for the process industries. Students will learn how to determine safety integrity levels and evaluate whether proposed or existing systems meet the performance and documentation requirements defined in the ISA84 (IEC 61511) standard. \nThis course is required for the ISA84 Safety Instrumented Systems Certificate Programs. Your course registration includes your registration for the exam. Those who successfully complete this course and pass the exam receive the designation of ISA84 SIS Fundamentals Specialist. \nYou will be able to: \n\nDifferentiate between process control and safety control\nImplement the ISA84 (IEC 61511) standard\nEvaluate process risk levels\nSelect Safety Integrity Levels (SILs) for Safety Instrumented Functions (SIFs) using a variety of techniques\nAnalyze the performance of different logic system technologies\nAnalyze the performance of various sensor\, logic\, and final element configurations\, as well as the impact of diagnostics\, test intervals\, common cause\, system size\, imperfect manual testing\, and bypassing\nDetermine optimum system test intervals\nSpecify and select safety instrumented systems\nApply the documentation requirements for process safety management\, regulations\, and industry standards\n\n  \nFor more information and to register online: \nhttps://www.isa.org/events-conferences/events-calendar/event-details/?productId=66343901
URL:https://www.houstonisa.org/event/ec50-safety-instrumented-systems-a-life-cycle-approach/
LOCATION:Kenexis\, 15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418\, Houston\, TX\, 77079-2418\, United States
CATEGORIES:Training,Cyber-Security
ORGANIZER;CN="Magda Moreno":MAILTO:magda.moreno.v@outlook.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20200209T080000
DTEND;TZID=America/Chicago:20200209T160000
DTSTAMP:20260424T110942
CREATED:20200209T223307Z
LAST-MODIFIED:20200209T223307Z
UID:10000087-1581235200-1581264000@www.houstonisa.org
SUMMARY:EC50 - Safety Instrumented Systems: A Life- Cycle Approach
DESCRIPTION:Location: \nKenexis\n15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418 \nDate: \nOctober 19-23\, 2020 \nCourse Hours: 8:00 a.m.-4:00 p.m. Monday-Thursday and 8:00 a.m.-12:00 p.m. Friday \nDescription: \nThis course focuses on the engineering requirements for the specification\, design\, analysis\, and justification of safety instrumented systems for the process industries. Students will learn how to determine safety integrity levels and evaluate whether proposed or existing systems meet the performance and documentation requirements defined in the ISA84 (IEC 61511) standard. \nThis course is required for the ISA84 Safety Instrumented Systems Certificate Programs. Your course registration includes your registration for the exam. Those who successfully complete this course and pass the exam receive the designation of ISA84 SIS Fundamentals Specialist. \nYou will be able to: \n\nDifferentiate between process control and safety control\nImplement the ISA84 (IEC 61511) standard\nEvaluate process risk levels\nSelect Safety Integrity Levels (SILs) for Safety Instrumented Functions (SIFs) using a variety of techniques\nAnalyze the performance of different logic system technologies\nAnalyze the performance of various sensor\, logic\, and final element configurations\, as well as the impact of diagnostics\, test intervals\, common cause\, system size\, imperfect manual testing\, and bypassing\nDetermine optimum system test intervals\nSpecify and select safety instrumented systems\nApply the documentation requirements for process safety management\, regulations\, and industry standards\n\n  \nFor more information and to register online: \nhttps://www.isa.org/events-conferences/events-calendar/event-details/?productId=66859920
URL:https://www.houstonisa.org/event/ec50-safety-instrumented-systems-a-life-cycle-approach-2/
LOCATION:Kenexis\, 15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418\, Houston\, TX\, 77079-2418\, United States
CATEGORIES:Training,Technical-Training
ORGANIZER;CN="Magda Moreno":MAILTO:magda.moreno.v@outlook.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20190730T080000
DTEND;TZID=America/Chicago:20190820T160000
DTSTAMP:20260424T110942
CREATED:20190917T102713Z
LAST-MODIFIED:20190917T102713Z
UID:10000098-1564473600-1566316800@www.houstonisa.org
SUMMARY:Technical Training Course Series
DESCRIPTION:The third phase in the IACS Cybersecurity Lifecycle (defined in ISA 62443-1-1) focuses on the activities associated with the ongoing operations and maintenance of IACS cybersecurity. This involves network diagnostics and troubleshooting\, security monitoring and incident response\, and maintenance of cybersecurity countermeasures implemented in the Design & Implementation phase. This phase also includes security management of change\, backup\, and recovery procedures and periodic cybersecurity audits. \nThis course will provide students with the information and skills to detect and troubleshoot potential cybersecurity events as well as the skills to maintain the security level of an operating system throughout its lifecycle despite the challenges of an ever-changing threat environment. \nYou will be able to: \n\nPerform basic network diagnostics and troubleshooting\nInterpret the results of IACS device diagnostic alarms and event logs\nDevelop and follow IACS backup and restoration procedures\nUnderstand the IACS patch management lifecycle\nDevelop and follow an IACS patch management procedure\nDevelop and follow an antivirus management procedure\nDefine the basics of application control and whitelisting tools\nDefine the basics of network and host intrusion detection\nDefine the basics of security incident and event monitoring tools\nDevelop and follow an incident response plan\nDevelop and follow an IACS management of change procedure\nConduct a basic IACS cybersecurity audit
URL:https://www.houstonisa.org/event/technical-training-course-series/
LOCATION:Kenexis\, 15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418\, Houston\, TX\, 77079-2418\, United States
CATEGORIES:Training,Technical-Training
ORGANIZER;CN="Glaubyane Viana":MAILTO:glaubyanev@gmail.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20190626T080000
DTEND;TZID=America/Chicago:20190627T170000
DTSTAMP:20260424T110942
CREATED:20190916T131511Z
LAST-MODIFIED:20190916T131511Z
UID:10000105-1561536000-1561654800@www.houstonisa.org
SUMMARY:EC54 – Advanced Design & SIL Verification
DESCRIPTION:This course focuses on more detailed design issues and further hands-on examples of system analysis/modeling. Students will be better able to perform system design and analysis thus saving their companies time and money in optimizing system designs. This course will enable you to analyze any system technology and configuration to see if it will meet the required SIL (Safety Integrity Level) and determine if existing systems are safe enough if they need to be upgraded\, and whether proposed systems will meet the performance requirements. You will also be able to determine the optimum manual test interval for any system\, saving your company time and money by not over- or under-testing systems. \nCertificate Program: This course is required for the ISA84 Safety Instrumented Systems Certificate Program 3. You can register for the course only or for the certificate program which includes course and exam. ISA Course Safety Instrumented Systems-Design\, Analysis\, and Justification (EC50) or Safety Instrumented Systems: Design\, Analysis\, and Justification (EC50E) and ISA Certificate Safety Instrumented Systems Certificate Program 1 are prerequisites for Certificate Program 3. Those who successfully complete this course and pass the certificate program exam receive the designation of ISA84 SIL Verification Specialist. \nYou will be able to: \n\nAnalyze any system technology and configuration to see if it will meet the required SIL (Safety Integrity Level)\nDetermine if existing systems are safe enough (or whether they need to be upgraded) and whether proposed systems will meet the performance requirements\nDetermine the optimum manual test interval for any system\, saving your company time and money by not over or under-testing systems\n\nYou will cover: \n\nSystem Modeling/Analysis Hands-On Advanced Examples: Multiple Examples with Different Field Device Technologies | Configurations | Diagnostic Levels | Test Intervals | Common Cause Factors | Imperfect Manual Testing\nDetailed Design Topics: Fault Tolerance | Safe Failure Fraction | Diagnostic Coverage | Confidence Limits | System Response to Faults | Using Devices for Control and Safety | Non-Fail-Safe Design Requirements | Interface Requirements\n\nTo register: \nhttps://www.isa.org/events-conferences/events-calendar/event-details/?productId=62967328
URL:https://www.houstonisa.org/event/ec54-advanced-design-sil-verification/
LOCATION:Kenexis\, 15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418\, Houston\, TX\, 77079-2418\, United States
CATEGORIES:Event
ATTACH;FMTTYPE=image/jpeg:https://www.houstonisa.org/wp-content/uploads/2019/09/training.jpg
ORGANIZER;CN="Magda Moreno":MAILTO:magda.moreno.v@outlook.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20190624T080000
DTEND;TZID=America/Chicago:20190625T170000
DTSTAMP:20260424T110942
CREATED:20190916T131239Z
LAST-MODIFIED:20190916T131239Z
UID:10000080-1561363200-1561482000@www.houstonisa.org
SUMMARY:EC52 – Advanced Safety Integrity Level (SIL) Selection
DESCRIPTION:This course focuses on further hands-on examples of Safety Integrity Level (SIL) selection using a variety of different techniques and providing more insight into the factors that determine risk reduction requirements. Students will be better able to save their companies time and money through the optimization of system performance requirements. This builds upon the foundation set in ISA’s EC50 (Safety Instrumented Systems-Design\, Analysis\, and Justification). \nCertificate Program: This course is required for the ISA84 Safety Instrumented Systems Certificate Program 2. When you register for the course\, the certificate exam is included with your registration. ISA Course Safety Instrumented Systems-Design\, Analysis\, and Justification (EC50) or Safety Instrumented Systems: Design\, Analysis\, and Justification (EC50E) and ISA Certificate Safety Instrumented Systems Certificate Program 1 are prerequisites for Certificate Program 2. Those who successfully complete this course and pass the exam receive the designation of ISA84 SIL Selection Specialist. \nYou will be able to: \nDevelop and implement different SIL selection techniques within your organization\, including the risk matrix\, risk graph\, and LOPA (Layer of Protection Analysis)\, in order to determine the appropriate level of performance needed of your safety systems. This will prevent you from over or under-designing the system requirements and will save your organization time and money. \nYou will cover: \n\nPrevention of System Requirements Over- or Under-Design\nDetermination of the Appropriate Level of Performance Needed for Your Safety Systems\nSafety Integrity Level (SIL) Selection Hands-on Examples: 3-Dimensional Risk Matrix | Risk Graph | LOPA (Layer of Protection Analysis) | Modified (implicit) LOPA\n\nTo register: \nhttps://www.isa.org/events-conferences/events-calendar/event-details/?productId=62967294
URL:https://www.houstonisa.org/event/ec52-advanced-safety-integrity-level-sil-selection/
LOCATION:Kenexis\, 15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418\, Houston\, TX\, 77079-2418\, United States
CATEGORIES:Event
ATTACH;FMTTYPE=image/jpeg:https://www.houstonisa.org/wp-content/uploads/2019/09/training.jpg
ORGANIZER;CN="Magda Moreno":MAILTO:magda.moreno.v@outlook.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20190617T080000
DTEND;TZID=America/Chicago:20190621T170000
DTSTAMP:20260424T110942
CREATED:20190916T131017Z
LAST-MODIFIED:20190916T131017Z
UID:10000079-1560758400-1561136400@www.houstonisa.org
SUMMARY:EC50 – Safety Instrumented Systems – Design\, Analysis\, & Justification
DESCRIPTION:This course focuses on the engineering requirements for the specification\, design\, analysis\, and justification of safety instrumented systems for the process industries. Students will learn how to determine safety integrity levels and evaluate whether proposed or existing systems meet the performance and documentation requirements defined in the ISA84 (IEC 61511) standard. \nThis course is required for the ISA84 Safety Instrumented Systems Certificate Programs. Your course registration includes your registration for the exam. Those who successfully complete this course and pass the exam receive the designation of ISA84 SIS Fundamentals Specialist. \nYou will be able to: \n\nDifferentiate between process control and safety control\nImplement the ISA84 (IEC 61511) standard\nEvaluate process risk levels\nSelect Safety Integrity Levels (SILs) for Safety Instrumented Functions (SIFs) using a variety of techniques\nAnalyze the performance of different logic system technologies\nAnalyze the performance of various sensor\, logic\, and final element configurations\, as well as the impact of diagnostics\, test intervals\, common cause\, system size\, imperfect manual testing\, and bypassing\nDetermine optimum system test intervals\nSpecify and select safety instrumented systems\nApply the documentation requirements for process safety management\, regulations\, and industry standards\n\nTo register: \nhttps://www.isa.org/events-conferences/events-calendar/event-details/?productId=62966822
URL:https://www.houstonisa.org/event/ec50-safety-instrumented-systems-design-analysis-justification/
LOCATION:Kenexis\, 15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418\, Houston\, TX\, 77079-2418\, United States
CATEGORIES:Event
ATTACH;FMTTYPE=image/jpeg:https://www.houstonisa.org/wp-content/uploads/2019/09/training.jpg
ORGANIZER;CN="Magda Moreno":MAILTO:magda.moreno.v@outlook.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20190610T080000
DTEND;TZID=America/Chicago:20190614T170000
DTSTAMP:20260424T110942
CREATED:20190916T130607Z
LAST-MODIFIED:20190916T130653Z
UID:10000078-1560153600-1560531600@www.houstonisa.org
SUMMARY:AEST – Automation Engineering Survival Training
DESCRIPTION:Do you have what it takes to survive in the world of process automation? \nSharpen your process automation know-how with this intensive week of expert-led lecture and hands-on exercises covering practical\, real-world automation survival skills. \nAutomation Engineering Survival Training is a unique process automation engineering experience designed to hone your process automation knowledge and skills. This intensive technical training boot camp for automation engineers combines lecture and hands-on labs with bonus features\, including a plant tour\, to maximize your learning experience. \nISA’s seasoned “Survival Expert” will guide you through a fast-paced and rigorous course of topics from process measurement fundamentals through advanced automation\, and everything in between! This course also serves as a solid introduction to other ISA engineering courses that can assist in the advancement of your process engineering career. \nWho should attend? \n\nNew automation\, control system\, or process control engineers\nRecent process engineering and other engineering graduates\nSeasoned engineers looking to refresh their process automation knowledge and skills\nIndividuals wanting to learn more about process automation.\n\nWatch our Survival Training video on YouTube! \nhttp://www.youtube.com/watch?v=WbK-mXtWnxE \nTo register: \nhttps://www.isa.org/events-conferences/events-calendar/event-details/?productId=62966797
URL:https://www.houstonisa.org/event/aest-automation-engineering-survival-training/
LOCATION:Kenexis\, 15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418\, Houston\, TX\, 77079-2418\, United States
CATEGORIES:Event
ATTACH;FMTTYPE=image/jpeg:https://www.houstonisa.org/wp-content/uploads/2019/09/training.jpg
ORGANIZER;CN="Magda Moreno":MAILTO:magda.moreno.v@outlook.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20190603T080000
DTEND;TZID=America/Chicago:20190627T170000
DTSTAMP:20260424T110942
CREATED:20190916T130215Z
LAST-MODIFIED:20190916T130215Z
UID:10000071-1559548800-1561654800@www.houstonisa.org
SUMMARY:June Technical Training Camp
DESCRIPTION:
URL:https://www.houstonisa.org/event/june-technical-training-camp/
LOCATION:Kenexis\, 15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418\, Houston\, TX\, 77079-2418\, United States
CATEGORIES:Event
ATTACH;FMTTYPE=image/jpeg:https://www.houstonisa.org/wp-content/uploads/2019/09/training.jpg
ORGANIZER;CN="Magda Moreno":MAILTO:magda.moreno.v@outlook.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20190603T080000
DTEND;TZID=America/Chicago:20190607T170000
DTSTAMP:20260424T110942
CREATED:20190916T125849Z
LAST-MODIFIED:20190916T125849Z
UID:10000069-1559548800-1559926800@www.houstonisa.org
SUMMARY:Technician Training Boot Camp (TTBC)
DESCRIPTION:ISA Technician Training Boot Camp combines a unique technical training course with minimum lecture and maximum hands-on experience. Over 75% of your time will be spent on equipment labs! \nThis week of intensive training will cover a broad range of technical topics needed to get the job done right. Starting with basic instrumentation fundamentals and ending with the advanced and ultimate in smart technology\, this comprehensive program will serve as a vital building block to your professional development and skills enhancement efforts. This course also serves as a solid introduction to other ISA courses that will help you advance your automation and control career. \nThis course focuses on the knowledge required by a control systems technician with five years’ experience in performing maintenance\, calibration and troubleshooting tasks typical of a plant floor environment. It will test an individual’s skill sets and serve as a self-assessment of additional training needs and will: \n\nProvide a review of industrial measurement and control concepts and terminology\nReview and Refresh present skills\nIntroduce new skills\n\nWho should attend? \n\nTechnicians with instrument maintenance responsibilities\, and a good working knowledge of instrument fundamentals and terminology.\nInstrument supervisors needing to understand and evaluate the skill sets required to perform instrument maintenance tasks.\nReliability and maintenance engineers needing to learn and/or evaluate instrument maintenance processes.\n\nObjectives: \n\nProvide an overview of industrial measurement and control in order to communicate appropriately with other control system professionals\nDefine a process to properly tune control loops\nPresent a systematic approach for troubleshooting and start-up of single- and multi-loop control loops to maintain good process control systems\nDescribe the operation and maintenance of pneumatic instruments employed in modern process facilities with an emphasis on valves\, positioners\, controllers\, and transmitters\nPerform proper installation\, calibration\, and maintenance of electronic instruments\nDeliver a working knowledge of smart field devices including both digital transmitters and digital valve controllers\n\nTo register: \nhttps://www.isa.org/events-conferences/events-calendar/event-details/?productId=63262849
URL:https://www.houstonisa.org/event/technician-training-boot-camp-ttbc-2/
LOCATION:Kenexis\, 15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418\, Houston\, TX\, 77079-2418\, United States
CATEGORIES:Event,Training
ATTACH;FMTTYPE=image/jpeg:https://www.houstonisa.org/wp-content/uploads/2019/09/training.jpg
ORGANIZER;CN="Magda Moreno":MAILTO:magda.moreno.v@outlook.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20190506T080000
DTEND;TZID=America/Chicago:20190523T170000
DTSTAMP:20260424T110942
CREATED:20190916T132447Z
LAST-MODIFIED:20190916T132447Z
UID:10000102-1557129600-1558630800@www.houstonisa.org
SUMMARY:Houston May Cyber Camp
DESCRIPTION:Houston May Cyber Camp
URL:https://www.houstonisa.org/event/houston-may-cyber-camp/
LOCATION:Kenexis\, 15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418\, Houston\, TX\, 77079-2418\, United States
CATEGORIES:Event
ATTACH;FMTTYPE=image/jpeg:https://www.houstonisa.org/wp-content/uploads/2019/09/training.jpg
ORGANIZER;CN="Magda Moreno":MAILTO:magda.moreno.v@outlook.com
END:VEVENT
END:VCALENDAR