BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//ISA - Houston Section - ECPv6.17.3//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:ISA - Houston Section
X-ORIGINAL-URL:https://www.houstonisa.org
X-WR-CALDESC:Events for ISA - Houston Section
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Chicago
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20190310T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20191103T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20200308T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20201101T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20210314T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20211107T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20220313T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20221106T070000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;VALUE=DATE:20200903
DTEND;VALUE=DATE:20201201
DTSTAMP:20200911T212155Z
CREATED:20200903T161033Z
LAST-MODIFIED:20200911T212155Z
UID:10000088-1599091200-1606780799@www.houstonisa.org
SUMMARY:IC32E Using the ISA/IEC 62443 Standard to Secure Your Control Systems E-Course
DESCRIPTION:Course Hours: Online Course – Refer to Syllabus\nCertification of Completion: A Certificate of Completion indicating the total number of CEUs earned will be provided upon successful completion of the course.Part of the ISA/IEC 62443 Cybersecurity Certificate Program\nYour course registration includes your registration for the exam.\n\n\n\n\nISA’s CyberU online instructor-led training courses offer the benefit of a high quality ISA training course with the added advantage of studying at your own pace in the office\, at home\, or while traveling. \nThis online course utilizes online training modules\, additional text materials\, online evaluations\, and e-mail discussions. Students will have access via email to an instructor and an opportunity to participate in live Q&A sessions with the instructor and other class participants. \nThis CyberU course runs for eight (8) weeks. You will have access to twelve online modules for the web/audio sessions. Each module is between 20 to 60 minutes. Your course syllabus will guide you through the course modules and provide assignments and the schedule for the live Q&A sessions. \n  \nMake sure to use HOUS2020 for $200 discount\n  \nDescription\n  \nA detailed look at how the ISA/IEC 62443 (formerly ISA 99) Standards can be used to protect your critical control systems. It also explores the procedural and technical differences between the security for traditional IT environments and those solutions appropriate for SCADA or plant floor environments.  The course explores the move to using open standards such as Ethernet\, TCP/IP\, and web technologies in SCADA and process control networks that has begun to expose these systems to the same cyber-attacks that have wreaked so much havoc on global government and corporate information systems. \n  \nYou will be able to:\n\nDiscuss the need and importance for control system security\nLearn about current principles and best practices\nUnderstand the structure and content of the ISA 99 / IEC 62443 series of documents\nDiscuss the principles behind the creating an effective long term program security\nLearn the basics of risk analysis\, industrial networking and network security\nUnderstand the concepts of defense in depth and zones and conduits\nLearn how to apply key risk mitigation techniques such as anti-virus\, patch management\, firewalls and virtual private networks\nLearn how secure software development strategies can make systems inherently more secure\nLearn what is being done to validate or verify the security of systems\n\n  \nYou will cover:\n  \nModule 1: Using the ISA/IEC 62443 Standards to Secure Your Control Systems\nProvides a basic introduction to control system cyber security and the ISA/IEC 62443 standards.  Discussion of trends\, regulations\, industry standards and best practices\, common myths\, the ISA 99 committee\, and the structure of the ISA 62443 standard.  Topics include:  Self-assessment of your Control Systems Security knowledge\, Trends in control system cybersecurity\, Potential Impacts\, Five common myths regarding IACS Security\, Regulations and Standards\, ISA99 committee work. \nModule 2: Terminology\, Concepts\, Models and Metrics\nCovers the material in ISA 62443-1-1 (published as ISA-99.00.01:2007) that forms the basis for the ISA 62443 series of standards.  Topics include: Difference between IT and IACS\, Security Objectives\, Defense-in-Depth\, Risk Assessment\, Policies\, Zones & Conduits\, Security Levels and the Security Lifecycle Models \nModule 3: Threats and Vulnerabilities\nProvides a basic introduction to networking with a focus on the application of Ethernet in the industrial environment.  Topics include: Types of networks\, OSI reference model\, Network Devices\, Network Protocols\, Network Tools built into Operating Systems. \nModule 4: Industrial Networking Basics L1-L3\nBuilds on the previous module and covers networking with a focus on the upper layers of the OSI reference model\, problems with the OSI model\, network discovery\, and security auditing tools in the industrial environment.  Topics include: Encapsulating data\, OSI reference model\, Network Devices\, Network Protocols. \nModule 5: Network Security Basics 101\nProvides a basic introduction to network security.  Topics include: Security Appliances\, Network Segmentation\, Encryption\, Secure Protocols and Intrusion Detection.  Topics include:  Why address security? Firewalls\, Network Segmentation Architectures\, Encryption\, Intrusion Detection\, Monitoring Network Traffic. \nModule 6: Industrial Protocols\nCovers at a high level the structure and application of common industrial protocols such as MODBUS\, PROFIBUS\, OPC and CIP (EtherNet/IP).  Topics include:  What is a protocol?  Multitude of Industrial Protocols\, Ports in use. \nModule 7: Establishing an Industrial Automation and Control Systems Security Program\nCovers the material in ISA 62443-2-1 (published as ISA-99.02.01:2009) that specifies the elements and requirements of an IACS Cyber Security Management System (CSMS).  Topics include: Six top level activities\, Common pitfalls\, Risk Analysis\, Security Policy\, Organization and Awareness\, Personnel security\, Physical & Environmental Security\, Network Segmentation\, Access Control\, Change Management\, Patch and Anti-virus management\, Information management\, Incident Response and Disaster Recover Planning\, Compliance Monitoring\, and Program Maintenance. \nModule 8: Security Risk Assessment and System Design\nCovers Security Level definitions and Foundational Requirements that establish a basis for the requirements in scoping an IACS assessment\, establishing zones & conduits\, analyzing the security risk for each zone\, assigning a security level target to each zone and verifying the design satisfies the security level target.  Topics include:  Definitions\, Risk Equation\, Cyber Risk Reduction Factor\, Basic Security analysis tools\, Identification of Zones and Conduits. \nModule 9: Intro to the IACS Cybersecurity Lifecycle\nShort jaunt into the Assess\, Develop & Implement and Maintain phases of the IACS Cybersecurity Lifecycle.  These phases are covered more in depth in ISA’s IC33\, IC34 & IC37 courses.  Topics include:  Cyber Security Life Cycle diagram\, Phases\, Continuous processes. \nModule 10: Security Program Requirements for IACS Service Providers\nCreating a secure product out of the box is only a small piece of the security puzzle.  Asset Owners\, Integrators and Suppliers all have a role.  This module covers how IEC 62443-2-4 specifies requirements IACS service providers can offer to the asset owner during integration and maintenance activities of an Automation Solution.  Topics include:  IACS Patching\, Asset Owner Requirements\, Product Supplier/Service Provider Requirements\, Malicious Code Protection. \nModule 11: Developing Secure Products and Systems\nOverview of component tier Product Development Requirements and Technical Security Requirements for IACS that are Product supplier centric.  Topics include:  Component tier standards ISA-62443-4-1 & ISA-62443-4-2\, Primary & Secondary goals\, ISA 62443 relationships\, ISA Security Compliance Institute (ISCI)\, ISASecure™. \nModule 12: Evolving Security Standards and Practices\nStandards are voluntary documents unless there is a requirement to use them.  In this module\, we look at the continuously evolving industrial security regulatory landscape.  The only constant is change!  Topics include:  Normative and Informative elements\, NIST Cyber Security Framework\, ISA-62443-2-1 requirement to monitor and evaluate applicable legislation relevant to cyber security\, Standards Development Organizations (SDOs). \nCourse Materials (PDF format):\n\nIC32E v2.0 Course Syllabus\nIC32E v2.0 Noteset Volume I with sections on Course Presentation slides from course modules\, Instructional Surveys/Answers and Additional Resources\nIC32E v2.0 Noteset Volume II with the following three publications\nANSI / ISA 99.00.01-2007 / IEC 62443-1-1: Security for Industrial Automation and Control Systems Part 1: Terminology\, Concepts\, and Models (Approved 29 October 2007)\nANSI / ISA 99.00.02-2009 / IEC 62443-2-1: Security for Industrial Automation and Control Systems Part 2: Establishing an Industrial Automation and Control System Security Program\nISA-62443.03.03 / IEC 62443-3-3: Security for Industrial Automation and Control Systems: System Security Requirements and Security Assurance Levels\nTextbook: Industrial Automation by Ronald L. Krutz (Second Edition)\n\n  \nFeatures of ISA CyberU online course:\nOnline Pre-recorded Course Modules\nYour instructor has pre-recorded each course module so that you can access the course presentations on your schedule. Each module is a web/audio session that takes approximately 20 – 60 minutes. \nAsk the Expert\nInteract with your expert instructor via email throughout the course and through scheduled live Q&A sessions. You can expect a reply to your email within 24 hours. This email address is active during the entire course duration. \nThe Q&A sessions provide an opportunity for you and your classmates to speak one-on-one with the instructor. You will have an opportunity to ask any questions you may have about the course material and interact with your fellow classmates. \nClass Discussions\nYou will be invited to subscribe to a course listserve that includes course participants. You can use this listserve to post questions and share experience relevant to the course with other class members. \nCourse Assignments and Exams\n\nTake the course pre-test before you begin studying the course material to get a better understanding of areas that you will want to focus on more during the course.\nHomework assignments for all modules will be indicated on the syllabus. The homework assignments are designed to help expand your understanding of the course material.\nComplete the final exam for the course in order to receive Continuing Education Units (CEU) credit. The final exam will be taken and scored online. You must receive at least 80% on the course exam to receive CEU credit. (Note this exam is not the ISA/IEC 62443 Cybersecurity Fundamentals Specialist Exam)
URL:https://www.houstonisa.org/event/ic32e-using-the-isa-iec-62443-standard-to-secure-your-control-systems-september-october-e-course/
CATEGORIES:Training,Cyber-Security
ORGANIZER;CN="Jacqueline Buskop":MAILTO:jbuskop@wesleyan.edu
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20200914
DTEND;VALUE=DATE:20201220
DTSTAMP:20200912T072801Z
CREATED:20200912T072745Z
LAST-MODIFIED:20200912T072801Z
UID:10000010-1600041600-1608422399@www.houstonisa.org
SUMMARY:TS02E Certified Control Systems Technician (CCST) Level II Exam Review Online E-Course
DESCRIPTION:Description: This is a fast-paced review of the knowledge and skills necessary for technicians with 7+ years of practical experience who are preparing to sit for the CCST Level II exam. An explanation of the requirements\, examination process and practice certification-type exams are provided. \nMake sure to use HOUS2020 for $200 discount\nrequirements\, examination process and practice certification-type exams are provided. \nCertificate Program (if available)  Certified Control System Technician Certificate \nYou will be able to:   \n\nUnderstand CCST program\nUnderstand basic concepts of process control\nUnderstand the use of instrument air and requirements\nUnderstand P&ID documentation and symbology\nUnderstand basic measurements\nUnderstand how to use temperature instrumentation\nUnderstand how to measure and regulate pressure and flow\nUnderstand how to measure and regulate level\nUnderstand how to use analyzers\nUnderstand how to operate control systems safely\nUnderstand new technologies in control systems and how numbering systems such as decimal\, binary and hexadecimal are used\nUnderstand basics of PLC and protocol requirements\nExplain Fieldbus and Communications protocols used in control systems\nUnderstand use of SCADA for control systems. Explain fiber optics options for control systems.\nUnderstand process dynamics (response to change) in control systems\nUnderstand how control actions affect functionality\nUnderstand how to use proportional control actions\nUnderstand objectives of tuning . Explain various tuning methods and identify when to use each.\nUnderstand how manipulating variables effects output functions\nUnderstand the need for and how to calibrate instruments\nLearn to optimize instrument performance\nLearn good maintenance practices for equipment and instruments\nLearn to use network diagnostic tools\nLearn to troubleshoot control system issues\nUnderstand safety procedures for effective operations\nUnderstand elements involved in control loop start up and tuning\n\n  \nYou will cover:  \nPre-Exam: Students are asked to take the pre-exam\, which includes questions related to the subject matter areas.  Answers will be provided for students to assess their knowledge\, prior to beginning the course material.\nModule 1A:  Overview of CCST Program\nModule 1B & 1C:  ISO 9000/Concepts of Process Control\nModule 2:  Instrument Air\nModule 3:  P&ID Basics \nModule 4:  Basic Measuring Units\nModule 5:  Instrument Fundamentals/Temperature\nModule 6:  Pressure/Flow\nModule 7:  Level\nModule 8:  Analyzers & Final Control Elements\nModule 9:  Safety & Electricity\nModule 10:  Advancing Technologies & Numbering Systems\nModule 11:  PLC Basics & Basic Requirements for Protocol\nModule 12:  Fieldbus & Communications Protocol\nModule 13:  Fiber Optics & SCADA\nModule 14:  Process Dynamics\nModule 15:  Control Action\nModule 16:  PID\nModule 17:  Tuning\nModule 18:  Advanced Control Strategy\nModule 19:  Calibration\nModule 20:  Instrument Performance\nModule 21:  Pressure Test/Calibration Equipment & Instrument Maintenance\nModule 22:  Best Procedures for LANs & Troubleshooting w/ Statistics\nModule 23:  Tools & DCS Troubleshooting\nModule 24:  Hazardous Locations & Installation\nModule 25:  Start Up & Loop Checking\nFinal Examination \n  \nClassroom Materials: \n\nCourse noteset with slides from course modules and course syllabus\nCCST Level II Study Guide\, ISA
URL:https://www.houstonisa.org/event/ts02e-certified-control-systems-technician-ccst-level-ii-exam-review-online-e-course/
CATEGORIES:Training,CapCcst-ExamReview
ORGANIZER;CN="Jacqueline Buskop":MAILTO:jbuskop@wesleyan.edu
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20200914T080000
DTEND;TZID=America/Chicago:20201113T170000
DTSTAMP:20200821T011250Z
CREATED:20200821T005704Z
LAST-MODIFIED:20200821T011250Z
UID:10000084-1600070400-1605286800@www.houstonisa.org
SUMMARY:EC50E Safety instrumented Systems: A Life-Cycle Approach E-Course
DESCRIPTION:Dates: September 14\, 2020 to November 13\, 2020 \nLocation: Online \nMake sure to use HOUS2020 for $200 discount\nDescription:  \n\n\n\nISA’s CyberU online instructor-led training course offers the benefit of a high-quality ISA training course with the added advantage of studying at your own pace in the office\, at home or while traveling.\n\n\n  \nThis online course utilizes online training modules\, additional text materials\, online evaluations\, and email discussions. Students will have access via email to an instructor and have an opportunity to participate in live Q&A sessions with the instructor and other class participants. The course focuses on the engineering requirements for the specification\, design\, analysis\, and justification of safety instrumented systems for the process industries. Students will learn how to determine safety integrity levels and evaluate whether proposed or existing systems meet the performance requirements.\n\n\n  \nThis CyberU course runs for seven (7) weeks. You will have access to seven online modules for a web/audio session. Each module takes approximately 60 minutes. Your course syllabus will guide you through the course modules\, provide assignments\, and the schedule for live Q & A sessions.\n\n\n\n  \nCertificate Program (if available) A Certificate of Completion indicating the total number of CEUs earned will be provided upon successful completion of the course. Your course registration includes your registration for the exam. \nYou will be able to:   \n\nDefine safety instrumented system.\nDiscuss how regulations have resulted through lessons learned from high profile process industry accidents.\nDetermine which ANSI/ISA\, AIChE\, and IEC guidelines and standards are relevant in industry.\nIdentify the Scope of ISA 61511\nDiscuss strategies for the management of functional safety\nIdentify the stages of the safety design life cycle.\nIdentify available safety layers for an IACS\nDiscuss the importance of “defense in depth” concept\nIdentify how SISs are used to reduce risk.\nCategorize risk using a PHA\nDetermine SIL using qualitative methods\nDetermine performance requirements for each SIL\nConduct a LOPA\nDiscuss LOPA methodology\nDevelop guidelines for LOPA\nDetermine risk tolerance\nIdentify resources for cyber security in an IACS\nIdentify failure modes and the risks involved with each\nIdentify hardware modeling techniques (SIL verification.)\nExplain the impact of redundancy on failure rates.\nDemonstrate the use of fault tolerance tables.\nDevelop an SRS\nExplain the pros and cons of relay logic systems\nExplain the pros and cons of microprocessor systems (PLC)\nDiscuss the pros and cons of pneumatic systems\nIdentify typical field devices in an IACS\nDiscuss impact of field devices on system performance\nExplain Center for Internet Security (CIS) Benchmarks\nExplain pros and cons of using certification vs prior use devices.\nExplain the FAT process.\nExplain installation and commissioning process.\nExplain the validation process\nIdentify priorities of the operation and maintenance phase.\nIdentify safety requirements for MOC\nIdentify documents to maintain for SRS\n\nYou will cover:  \n\n\n\n·         Module 1: Background\, Scope\, Management Issues\, The Life Cycle\n\n\n·         Module 2: Hazard and Risk Assessment\, Selecting SILs\n\n\n·         Module 3: Layer of Protection Analysis (LOPA) and Cybersecurity\n\n\n·         Module 4: Reliability and Modeling Issues\n\n\n·         Module 5: SRS and Logic Solver Technologies\n\n\n·         Module 6: Field Devices\, Certification\, Miscellaneous Design Issues\n\n\n·         Module 7: FAT and Beyond
URL:https://www.houstonisa.org/event/ec50e-safety-instrumented-systems-a-life-cycle-approach-e-course/
CATEGORIES:Training,Ansi-ISA95
ORGANIZER;CN="Jacqueline Buskop":MAILTO:jbuskop@wesleyan.edu
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20200928
DTEND;VALUE=DATE:20201219
DTSTAMP:20200921T171259Z
CREATED:20200921T171259Z
LAST-MODIFIED:20200921T171259Z
UID:10000006-1601251200-1608335999@www.houstonisa.org
SUMMARY:IC40E Batch Control Systems: Using the ANSI ISA88 Standards E-Course
DESCRIPTION:Description: This course presents an approach to developing functional requirements/specifications using the models and terminology defined in the ANSI/ISA88 batch control standards. A review of the characteristics of batch manufacturing systems is included. Participants will explore the ANSI/ISA88 concept that separates the recipe from the equipment. This course includes a methodology that defines an object approach based on ANSI/ISA88 that promotes the reuse of these objects from one project to the next. \nMake sure to use HOUS2020 for $200 discount!\nCertificate Program (if available) \nYou will be able to:   \n\n\n\n·         Specify the requirements for a batch control system\n\n\n·         Effectively structure and subdivide equipment entities\n\n\n·         Define procedural elements that can be effectively used with the above equipment entities\n\n\n·         Describe modes and states and how they are applied at the equipment level\n\n\n·         Develop phase logic that executes in equipment and that can deal with both normal and abnormal operations\n\n\n·         Recognize the various control languages that are available\n\n\n·         Identify the alternative architectures for Programmable Logic Controllers (PLCs)\, Distributed Control Systems (DCSs)\, and PC-based control systems\n\n\n·         Describe the interfaces that are needed between batch control and other systems within an enterprise\n\n\n\n  \nYou will cover:  \n\nPre-Exam: Students are asked to take the pre-exam\, which includes questions related to the subject matter areas. Answers will be provided for students to assess their knowledge\, prior to beginning the course material.\nModule 1: Overview of ANSI/ISA 88\nModule 2: Physical Model Part I\nModule 3: Physical Model Part II\nModule 4: Physical Model Part III\nModule 5: Recipes Part I\nModule 6: Recipes Part II\nModule 7: Equipment Phase Logic\nModule 8: Activity Model\nModule 9: Designing Batch Systems\nModule 10: ISA & Other Batch Standards\nFinal Examination
URL:https://www.houstonisa.org/event/ic40e-batch-control-systems-using-the-ansi-isa88-standards-e-course/
CATEGORIES:Training,Technical-Training
ORGANIZER;CN="Jacqueline Buskop":MAILTO:jbuskop@wesleyan.edu
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20200928
DTEND;VALUE=DATE:20210101
DTSTAMP:20200921T172218Z
CREATED:20200921T172218Z
LAST-MODIFIED:20200921T172218Z
UID:10000001-1601251200-1609459199@www.houstonisa.org
SUMMARY:FG05E Fundamentals of Industrial Process\, Measurement and Control E-Course
DESCRIPTION:Description: This course provides an overview of industrial measurement and control for technicians\, engineers\, and managers\, providing a basic understanding and foundation for communication with other control systems professionals. \nMake sure to use HOUS2020 for $200 discount!\nCertificate Program (if available) A Certificate of Completion indicating the total number of CEUs earned will be provided upon successful completion of the course. \nYou will be able to:   \n\n\n\n·         Communicate the latest trends in measurement and control\n\n\n·         Recognize the role of measurement and control in industrial processes\n\n\n·         Compare continuous\, batch\, and discrete control and how they are used in the industry\n\n\n·         Interpret measurement and control terminology\n\n\n·         Compare the methods and devices used in temperature\, pressure\, level\, and flow measurement\n\n\n·         Describe the operation and components of a feedback control loop\n\n\n·         Identify the fundamental concepts of controller tuning\n\n\n·         Compare different control system architectures\, including single loop controllers\, Distributed Control Systems (DCS)\, and Programmable Logic Controllers (PLCs)\n\n\n·         Apply ISA standards to interpret symbols and documentation\n\n\n\n  \nYou will cover:  \n\n\n\nPre-Exam: Students are asked to take the pre-exam\, which include questions related to the subject matter areas. Answer will be provided for students to assess their knowledge\, prior to beginning the course material. \nModule 1: Concepts of Process Control\nModule 2: Documentation\nModule 3:  Industrial Measurement Systems Part I \nModule 4: Industrial Measurement Systems Part II\nModule 5: Temperature Measurement Part I\nModule 6: Temperature Measurement Part II \nModule 7: Pressure Measurement \nModule 8: Level Measurement Part I \nModule 9: Level Measurement Part II \nModule 10: Flow Measurement Part I \nModule 11: Flow Measurement Part II \nModule 12: Control Valves Part I \nModule 13: Control Valves Part II \nModule 14: Feedback Control Strategies Part I \nModule 15: Feedback Control Strategies Part II \nModule 16: Advanced Control Strategies \nModule 17: Smart Field Devices  \nModule 18: Control System Hardware \nFinal Examination
URL:https://www.houstonisa.org/event/fg05e-fundamentals-of-industrial-process-measurement-and-control-e-course/
CATEGORIES:Training,Technical-Training
ORGANIZER;CN="Jacqueline Buskop":MAILTO:jbuskop@wesleyan.edu
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20200930
DTEND;VALUE=DATE:20201031
DTSTAMP:20200921T172409Z
CREATED:20200921T172409Z
LAST-MODIFIED:20200921T172409Z
UID:10000004-1601424000-1604102399@www.houstonisa.org
SUMMARY:FG05M Fundamentals of Industrial Process\, Measurement and Control (M-Course)
DESCRIPTION:Description: The new modular delivery of the (FG05M) course—is ideally suited for those looking for introductory learning in the field of automation and control. As overview instruction for technicians\, engineers\, and managers\, the course provides the fundamental knowledge understanding and a foundation for communicating with other control systems professionals. \nMake sure to use HOUS2020 for $200 discount!\nCertificate Program (if available): A Certificate of Completion indicating the total number of CEUs earned will be provided upon successful completion of the course. \nYou will be able to:   \n\n\n\n·         Communicate the latest trends in measurement and control\n\n\n·         Recognize the role of measurement and control in industrial processes\n\n\n·         Compare continuous\, batch\, and discrete control and how they are used in the industry\n\n\n·         Interpret measurement and control terminology\n\n\n·         Compare the methods and devices used in temperature\, pressure\, level\, and flow measurement\n\n\n·         Describe the operation and components of a feedback control loop\n\n\n·         Identify the fundamental concepts of controller tuning\n\n\n·         Compare different control system architectures\, including single loop controllers\, Distributed Control Systems (DCS)\, and Programmable Logic Controllers (PLCs)\n\n\n·         Apply ISA standards to interpret symbols and documentation\n\n\n\nYou will cover:  \nModule 1: Concepts of Process Control\nModule 2: Documentation\nModule 3:  Industrial Measurement Systems (Parts I & II) \nModule 4: Temperature Measurement (Parts I & II)\nModule 5: Pressure Measurement \nModule 6: Level Measurement (Parts I & II) \nModule 7: Flow Measurement (Parts I & II) \nModule 8: Control Valves (Parts I & II) \nModule 9: Feedback Control Strategies \nModule 10: Advanced Control Strategies \nModule 11: Smart Field Devices \nModule 12: Control System Hardware
URL:https://www.houstonisa.org/event/fg05m-fundamentals-of-industrial-process-measurement-and-control-m-course-2/
CATEGORIES:Training,Technical-Training
ORGANIZER;CN="Jacqueline Buskop":MAILTO:jbuskop@wesleyan.edu
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20200930
DTEND;VALUE=DATE:20201101
DTSTAMP:20200921T172658Z
CREATED:20200921T172658Z
LAST-MODIFIED:20200921T172658Z
UID:10000005-1601424000-1604188799@www.houstonisa.org
SUMMARY:TS06M Industrial Data Communications Systems M-Course
DESCRIPTION:Description: Starting from the basics\, this course gives you the tools to design and maintain industrial communications systems on your plant floor. You’ll learn the underlying principles behind today’s industrial communications systems\, including Modbus\, Data Highway Plus\, Ethernet\, and TCP/IP. Real-life examples and case histories provide insight into the facts behind control networks and how to apply and maintain them effectively in your plant. \nMake sure to use HOUS2020 for $200 discount!\nCertificate Program (if available) \nYou will be able to:   \n\nApply traditional and current serial standards\, such as EIA-232\, 422\, 423\, and 485\, in industrial plant floor settings\nExplain the inner working of proprietary PLC networks\nIdentify Local Area Network (LAN) topologies and protocols\nCompare media access techniques such as CSMA/CD\, token passing\, and master/slave\nDescribe design methods for Industrial LANs using Ethernet\nDefine the different Ethernet varieties and which are best for industry\nList options for Ethernet hardware to avoid instant obsolescence and being locked in the past\nSelect and apply fiber optic technology\nDifferentiate between different wireless and Industrial Ethernet alternatives\n\n  \nYou will cover:  \n\n\n\n·         What is Data Communications?: ISO/OSI Reference Model | Terminology Basics\n\n\n·         Serial Communications: Modem Principles | The EIA-232E Standard | Beyond 232: EIA-422/423/485/530 Standards\n\n\n·         The Analog TelCo system including circuit types and Modems\n\n\n·         The Digital TelCo system  T1/T3 circuits\, ISDN\, xDSL\, Frame Relay\, X.25 networks\, ATM and SONET\n\n\n·         Data Link Layer Basics: Data Encoding | Error Detection/Correction Schemes\n\n\n·         Industrial Protocols:  Modbus and Modbus/IP\,  DNP3.0 and DF-1\n\n\n·         LAN Technologies: Overview of Ethernet Technology | Ethernet Cabling and Configuration Rules | Repeaters\, Bridges\, Routers\, and Gateways\n\n\n·         TCP/IP basics   | Is Ethernet Ready for the Plant Floor? | Industrial Ethernet Design Techniques\n\n\n·         Fiber optics:  standards\, cables\, applications\, limitations\n\n\n·         Wireless Industrial Communications:  SP100\, Wireless HART\, Wireless Fieldbus\, Wireless Profibus\n\n\n·         Inside the Proprietary PLC Networks: MB+ and DH+ LAN design\n\n\n·         Data Exchange using   OPC for inter-system data exchanges\n\n\n·         Troubleshooting Industrial Networks and Fieldbuses: Five Rules for Troubleshooting | Troubleshooting with Statistics | Troubleshooting Tools\n\n\n\n  \n\n\n\n·         Module 1: Basic Electrical Communications: Data Communications Defined\n\n\n·         Module 2: Basic Electrical Communications: Data Communications History\n\n\n·         Module 3: Basic Electrical Communications: OSI Model\n\n\n·         Module 4: Basic Electrical Communications: Defining Industrial Communications\n\n\n·         Module 5: Basic Serial Data Signaling: Electrical Signaling\n\n\n·         Module 6: Basic Serial Data Signaling: EIA/TIA 232\n\n\n·         Module 7: Basic Serial Data Signaling: Clocking Asynchronous Data\n\n\n·         Module 8: Contemporary Data Communication Methods: Digital Representations of Data\n\n\n·         Module 9: Contemporary Data Communication Methods: Error Detection and Correction\n\n\n·         Module 10: Contemporary Data Communication Methods: Beyond EIA 232\n\n\n·         Module 11: Wireline and Fiber-Optic Communications: Wireline Communications\n\n\n·         Module 12: Wireline and Fiber-Optic Communications: Fiber-Optic Communication\n\n\n·         Module 13: Industrial Protocols: ModBus RT\n\n\n·         Module 14: Industrial Protocols: DeviceNET\n\n\n·         Module 15: Industrial Protocols: DNP 3.0\n\n\n·         Module 16: Local Area Networks\n\n\n·         Module 17: Media Access Control\n\n\n·         Module 18: Ethernet\n\n\n·         Module 19: Ethernet Variations \n\n\n·         Module 20: Wireless Principles\n\n\n·         Module 21: 802.15\n\n\n·         Module 22: Wireless WAN Technologies\n\n\n·         Module 23: WAN Technologies\n\n\n·         Module 24: Wide-Area Network Technologies\n\n\n·         Module 25: Network Connections\n\n\n·         Module 26: Ethernet LAN Components\n\n\n·         Module 27: TCP/IP\n\n\n·         Module 28: IPV6\n\n\n·         Module 29: IPV6 Implementation\n\n\n·         Module 30: Application Layer Protocols\n\n\n·         Module 31: Industrial Network Considerations Part 1\n\n\n·         Module 32: Network Considerations Part 2
URL:https://www.houstonisa.org/event/ts06m-industrial-data-communications-systems-m-course/
CATEGORIES:Training,Technical-Training
ORGANIZER;CN="Jacqueline Buskop":MAILTO:jbuskop@wesleyan.edu
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20201005
DTEND;VALUE=DATE:20201227
DTSTAMP:20200912T073257Z
CREATED:20200912T073257Z
LAST-MODIFIED:20200912T073257Z
UID:10000002-1601856000-1609027199@www.houstonisa.org
SUMMARY:EC00E Certified Automation Professional (CAP) Exam Review Course E-Course
DESCRIPTION:Description: This self-paced\, online course reviews the knowledge and skill areas included on the Certified Automation Professional® (CAP®) certification program examination. The intent is to prepare an automation professional who meets the exam criteria to take the exam. The content is based on the Job Analysis Domains\, Tasks\, Knowledge Areas\, and Skill Areas developed as the basis for the CAP certification exam. This course is the recommended replacement for the discontinued CAP Learning System preparation tool\, as it incorporates content similarly included in that tool. \nMake sure to use HOUS2020 for $200 discount\nCertificate Program (if available): N/A \nYou will be able to:   \n\nRecognize the scope and format of the CAP exam\nCompare process variable measurements and control valve selections\nExplain how the various types of control technologies are used in industrial automation\, including process control from basic to advanced control\, discrete\, batch\, motor\, and motion control\nAppreciate the range of digital communications used in automation\, and how these are used in system integration\nIdentify when safety instrumented systems (SISs) are needed and how they are specified\nAppreciate the importance of electrical issues that relate to grounding and noise\nDeal with the critical areas of automation opportunity identification and project justification\nIdentify the best practice methodology for automation project execution\n\nYou will cover:  \nPre-Examination \nModule 1: Introduction/CAP Basics \nModule 2: Process Instrumentation \nModule 3: Analytical Instrumentation \nModule 4: Continuous Control \nModule 5: Control Valves & Analog Communications \nModule 6: Control System Documentation & Equipment \nPractice Exam #1 \nModule 7: Discrete I/O Devices & General Manufacturing Measurements \nModule 8: Motor & Drive Control \nModule 9: Motion Control \nModule 10: Process Modeling & Advanced Process Control \nModule 11: Batch Control \nModule 12: Alarm Management & Reliability \nPractice Exam #2 \nModule 13: Process Safety & Safety Instrumented Systems \nModule 14: Electrical Installations & Electrical Safety \nModule 15: Digital Communications \nModule 16: Industrial Networks \nModule 17: MES Integration & Network Security \nModule 18: Operator Interface & Data Management \nModule 19: Software & Custom Software \nModule 20: Operator Training & Checkout\, System Testing & Startup \nModule 21: Troubleshooting \nModule 22: Automation Benefits\, Project Justification/Management and Interpersonal Skills \nFinal Examination
URL:https://www.houstonisa.org/event/ec00e-certified-automation-professional-cap-exam-review-course-e-course/
CATEGORIES:Training,CapCcst-ExamReview
ORGANIZER;CN="Jacqueline Buskop":MAILTO:jbuskop@wesleyan.edu
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20201026T080000
DTEND;TZID=America/Chicago:20201027T160000
DTSTAMP:20201002T162128Z
CREATED:20200209T223429Z
LAST-MODIFIED:20201002T162128Z
UID:10000086-1603699200-1603814400@www.houstonisa.org
SUMMARY:EC52 – Advanced Safety Integrity Level (SIL) Selection (October 2020)
DESCRIPTION:Location: \nKenexis\n15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418 \nDate: \nOctober 26-27\, 2020 \nCourse Hours: 8:00 a.m.-4:00 p.m. \nDescription:\nThis course focuses on further hands-on examples of Safety Integrity Level (SIL) selection using a variety of different techniques and providing more insight into the factors that determine risk reduction requirements. Students will be better able to save their companies time and money through the optimization of system performance requirements. This builds upon the foundation set in ISA’s EC50 (Safety Instrumented Systems-Design\, Analysis\, and Justification). \nCertificate Program: This course is required for the ISA84 Safety Instrumented Systems Certificate Program 2. When you register for the course\, the certificate exam is included with your registration.ISA Course Safety Instrumented Systems-Design\, Analysis\, and Justification (EC50) or Safety Instrumented Systems: Design\, Analysis\, and Justification (EC50E) and ISA Certificate Safety Instrumented Systems Certificate Program 1 are prerequisites for Certificate Program 2. Those who successfully complete this course and pass the exam receive the designation of ISA84 SIL Selection Specialist. \n\nYou will be able to:\nDevelop and implement different SIL selection techniques within your organization\, including the risk matrix\, risk graph\, and LOPA (Layer of Protection Analysis)\, in order to determine the appropriate level of performance needed of your safety systems. This will prevent you from over or under designing the system requirements and will save your organization time and money. \nYou will cover:\n\nPrevention of System Requirements Over- or Under-Design\nDetermination of the Appropriate Level of Performance Needed for Your Safety Systems\nSafety Integrity Level (SIL) Selection Hands-on Examples: 3-Dimensional Risk Matrix | Risk Graph | LOPA (Layer of Protection Analysis) | Modified (implicit) LOPA\n\n  \nFor more information: \nhttps://www.isa.org/products/advanced-safety-integrity-level-sil-selection-ec52
URL:https://www.houstonisa.org/event/ec52-advanced-safety-integrity-level-sil-selection-3/
LOCATION:Kenexis\, 15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418\, Houston\, TX\, 77079-2418\, United States
CATEGORIES:Training,Safety
ORGANIZER;CN="Jacqueline Buskop":MAILTO:jbuskop@wesleyan.edu
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20201028T080000
DTEND;TZID=America/Chicago:20201029T160000
DTSTAMP:20201002T162146Z
CREATED:20200209T223539Z
LAST-MODIFIED:20201002T162146Z
UID:10000106-1603872000-1603987200@www.houstonisa.org
SUMMARY:EC54 – Advanced Design & SIL Verification (October 2020)
DESCRIPTION:Location: \nKenexis\n15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418 \nDate: \nOctober 28-29\, 2020 \nCourse Hours: 8:00 a.m.-4:00 p.m. \nDescription:\nThis course focuses on more detailed design issues and further hands-on examples of system analysis/modeling. Students will be better able to perform system design and analysis thus saving their companies time and money in optimizing system designs. This course will enable you to analyze any system technology and configuration to see if it will meet the required SIL (Safety Integrity Level) and determine if existing systems are safe enough\, if they need to be upgraded\, and whether proposed systems will meet the performance requirements. You will also be able to determine the optimum manual test interval for any system\, saving your company time and money by not over- or under-testing systems. \nCertificate Program: This course is required for the ISA84 Safety Instrumented Systems Certificate Program 3. You can register for the course only or for the certificate program which includes course and exam. ISA Course Safety Instrumented Systems-Design\, Analysis\, and Justification (EC50) or Safety Instrumented Systems: Design\, Analysis\, and Justification (EC50E) and ISA Certificate Safety Instrumented Systems Certificate Program 1 are prerequisites for Certificate Program 3. Those who successfully complete this course and pass the certificate program exam receive the designation of ISA84 SIL Verification Specialist. \nYou will be able to:\n\nAnalyze any system technology and configuration to see if it will meet the required SIL (Safety Integrity Level)\nDetermine if existing systems are safe enough (or whether they need to be upgraded) and whether proposed systems will meet the performance requirements\nDetermine the optimum manual test interval for any system\, saving your company time and money by not over or under-testing systems\n\nYou will cover:\n\nSystem Modeling/Analysis Hands-On Advanced Examples: Multiple Examples with Different Field Device Technologies | Configurations | Diagnostic Levels | Test Intervals | Common Cause Factors | Imperfect Manual Testing\nDetailed Design Topics: Fault Tolerance | Safe Failure Fraction | Diagnostic Coverage | Confidence Limits | System Response to Faults | Using Devices for Control and Safety | Non-Fail-Safe Design Requirements | Interface Requirements\n\n For more information: \nhttps://www.isa.org/products/advanced-design-and-sil-verification-ec54
URL:https://www.houstonisa.org/event/ec54-advanced-design-sil-verification-3/
LOCATION:Kenexis\, 15995 N Barkers Lndg Rd Ste 143 Houston\, TX 77079-2418\, Houston\, TX\, 77079-2418\, United States
CATEGORIES:Training,Safety
ORGANIZER;CN="Jacqueline Buskop":MAILTO:jbuskop@wesleyan.edu
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20201101
DTEND;VALUE=DATE:20201221
DTSTAMP:20200903T161049Z
CREATED:20200903T161049Z
LAST-MODIFIED:20200903T161049Z
UID:10000064-1604188800-1608508799@www.houstonisa.org
SUMMARY:IC33E Assessing the Cybersecurity of New or Existing IACS Systems  E-Course (November)
DESCRIPTION:Dates:  Self Paced \nLength: Six (6)  online modules running for 7 weeks.  Each module is 20-90 minutes each. \nCEU Credits: 1.4 \nDescription: Part of the ISA/IEC 62443 Cybersecurity Certificate Program.  Assessing the Cybersecurity of New or Existing IACS Systems (IC33E) is an online course which will provide students with the information and skills to assess the cybersecurity of a new or existing IACS and to develop a cybersecurity requirements specification that can be used to document the cybersecurity requirements of the project. \nAn online course which will provide students with the information and skills to assess the cybersecurity of a new or existing IACS and to develop a cybersecurity requirements specification that can be used to document the cybersecurity requirements of the project.  This course is a blended learning format which includes interactive\, on-demand modules\, weekly assignments and instructor call-in sessions.  Modules include instructional content\, interactive reviews\, video lab demonstrations conducted by an ISA Cybersecurity instructor and assessments. \n  \nMake sure to use HOUS2020 for $200 discount!\n  \nCertificate Program (if available) Part of the ISA/IEC 62443 Cybersecurity Certificate Program: After successfully completing all eight modules\, students may take the exam for ISA/IEC 62443 Cybersecurity Design Specialist  Exam is included in the Full Course Bundle but must be purchased separately if modules are purchased separately. \nYou will be able to:  \n\n Identify and document the scope of the IACS under assessment\nSpecify\, gather or generate the cybersecurity information required to perform the assessment\nIdentify or discover cybersecurity vulnerabilities inherent in the IACS products or system design\nOrganize and facilitate a cybersecurity risk assessment for an IACS\nIdentify and evaluate realistic threat scenarios\nIdentify gaps in existing policies\, procedures and standards\nEstablish and document security zones and conduits\nPrepare documentation of assessment results\n\nYou will cover:  \n\nPreparing for an Assessment\nCybersecurity Vulnerability Assessment\nConducting Vulnerability Assessments\nCyber Risk Assessments\nConducting Cyber Risk Assessments\nDocumentation and Reporting\nAnd more…\n\nLab Demonstrations (Included in the Modules): \n\nCritiquing System Architecture Diagrams\nAsset Inventory\nGap Assessment\nWindows Vulnerability Assessment\nCapturing Ethernet Traffic\nPort Scanning\nWindows Vulnerability Scanning\nPerform a High-Level Cybersecurity Risk Assessment\nCreating a Zone & Conduit Diagram\nPerform a Detailed Cyber Risk Assessment\n\nRisk Assessment Report
URL:https://www.houstonisa.org/event/ic33e-assessing-the-cybersecurity-of-new-or-existing-iacs-systems-e-course-november/
CATEGORIES:Training,Cyber-Security
ORGANIZER;CN="Jacqueline Buskop":MAILTO:jbuskop@wesleyan.edu
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20201105T140000
DTEND;TZID=America/Chicago:20201105T150000
DTSTAMP:20201030T011930Z
CREATED:20201030T011820Z
LAST-MODIFIED:20201030T011930Z
UID:10000112-1604584800-1604588400@www.houstonisa.org
SUMMARY:TBPELS Ethics Webinar
DESCRIPTION:The Board is offering these free ethics webinars to assist license holders with meeting their ethics requirement. Each webinar provides an up-to-date overview of agency activities\, case studies\, and a review of professional ethics topics. \nWebinar ID: 827-775-987 \nPresenter: \nTexas Board of Professional Engineers and Land Surveyors \nInstructions: \nClick on this link to register \nhttps://attendee.gotowebinar.com/register/6296219604808345871 \nAdditional information available at https://engineers.texas.gov/webinars.html \n  \n 
URL:https://www.houstonisa.org/event/tbpels-ethics-webinar/
CATEGORIES:Event,ISA Houston Section Program
ATTACH;FMTTYPE=image/png:https://www.houstonisa.org/wp-content/uploads/2020/10/TBPELS.png
ORGANIZER;CN="Clifford D. Wuertz":MAILTO:cdwuertz@gmail.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20201117T080000
DTEND;TZID=America/Chicago:20201117T160000
DTSTAMP:20201106T204552Z
CREATED:20201106T204552Z
LAST-MODIFIED:20201106T204552Z
UID:10000113-1605600000-1605628800@www.houstonisa.org
SUMMARY:Virtual Process Industry Conference
DESCRIPTION:Registration: \nBefore 6 November: FREE\nAfter 6 November: 80 USD for ISA Member\n100 USD for Non-Member/List \nPresenter: \nISA Process Measurement & Control Division \nJoin ISA for this one-day virtual conference where we’ll discuss topic areas covering: process instrumentation/control\, cybersecurity & safety systems\, open architecture & infrastructure\, and operational excellence. \nTo Register Visit: https://virtualpic.vfairs.com \n  \n 
URL:https://www.houstonisa.org/event/virtual-process-industry-conference/
CATEGORIES:Event,Conferences
ATTACH;FMTTYPE=image/jpeg:https://www.houstonisa.org/wp-content/uploads/2020/11/pic.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20201202T113000
DTEND;TZID=America/Chicago:20201202T123000
DTSTAMP:20201115T003711Z
CREATED:20201115T003711Z
LAST-MODIFIED:20201115T003711Z
UID:10000114-1606908600-1606912200@www.houstonisa.org
SUMMARY:New Developments in Multivariable Model Predictive Control
DESCRIPTION:Abstract: \nIndustrial operations are constantly challenged with improving production rates\, yields\, energy efficiency and process stability. Multivariable Model Predictive Control has proven to be an effective tool for improving operations by utilizing the full process capabilities consistently. However\, the skills required to implement the technology and sustain the substantial benefits has been hampered by the usability of the software and adaptability of the applications. \nMany new technology developments have improved the usability and adaptability of multivariable model predictive control. These developments include modern and intuitive user interfaces\, customizable models to support unique process behavior\, fast and flexible OPC connection tools\, automated model building\, integration with first principles dynamic models\, improved performance monitoring among others. This presentation will review the new technology developments that have improved the usability and adaptability of advanced process control and how they impact industrial operations of many types. \nPresenter: \nBill Poe\, Technical Adviser for AVEVA. \n \nBill Poe is a Technical Advisor at AVEVA with over 35 years of experience in operations\, project development\, implementation and management of advanced process control\, optimization and real-time performance monitoring projects in a variety of industries. Prior to AVEVA\, Bill held positions at Shell Oil Company\, GE and Schneider Electric. He has several patents\, achieved a President’s Award at Shell Oil\, received the GE Innovators Award and attained the Invensys Circle of Excellence. Bill holds a bachelor’s degree from Georgia Institute of Technology and a Master of Science from Columbia University both in Chemical Engineering. \nInstructions: \nDownload and install Zoom software if necessary\nVisit www.houstonisa.org and register with your name and email\nThe day before the meeting you will receive an email with the meeting ID and password\nYou may join the meeting starting at approximately 11:00 am for socializing and announcements\nThe presentation will begin at 11:30 am \n 
URL:https://www.houstonisa.org/event/new-developments-in-multivariable-model-predictive-control/
CATEGORIES:Event,ISA Houston Section Program
ORGANIZER;CN="Clifford D. Wuertz":MAILTO:cdwuertz@gmail.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20210122T080000
DTEND;TZID=America/Chicago:20210122T170000
DTSTAMP:20210122T091252Z
CREATED:20210122T085822Z
LAST-MODIFIED:20210122T091252Z
UID:10000018-1611302400-1611334800@www.houstonisa.org
SUMMARY:IC33E Assessing the Cybersecurity of New or Existing IACS Systems
DESCRIPTION:  \n\n\n\n\n\n\n\nAssessing the Cybersecurity of New or Existing IACS Systems (IC33E) is an online course which will provide students with the information and skills to assess the cybersecurity of a new or existing IACS and to develop a cybersecurity requirements specification that can be used to document the cybersecurity requirements of the project. This course is a blended learning format which includes interactive\, on-demand modules\, weekly assignments and instructor call-in sessions. Modules include instructional content\, interactive reviews\, video lab demonstrations conducted by an ISA Cybersecurity instructor and assessments. \nMake sure to use HOUS2020 for $200 discount!\n\n\nCertification of Completion:A Certificate of Completion indicating the total number of CEUs earned will be provided upon successful completion of the course. \nCertificate Program:Part of the ISA/IEC 62443 Cybersecurity Certificate Program \nYour course registration includes your registration for the exam. \n  \n\nISA’s CyberU online instructor-led training courses offer the benefit of a high-quality ISA training course with the added advantage of studying at your own pace in the office\, at home\, or while traveling.\nThis online course utilizes online training modules\, additional text materials\, online evaluations\, and e-mail discussions. Students will have access via email to an instructor and an opportunity to participate in live Q&A sessions with the instructor and other class participants.\nThis CyberU course runs for seven (7) weeks. You will have access to six online modules for the modular sessions. Each module is between 20 to 90 minutes. Your course syllabus will guide you through the course modules and provide assignments and the schedule for the live Q&A sessions.\n\n  \nDescription \nAssessing the Cybersecurity of New or Existing IACS Systems (IC33E) is an online course which will provide students with the information and skills to assess the cybersecurity of a new or existing IACS and to develop a cybersecurity requirements specification that can be used to document the cybersecurity requirements of the project. This course is a blended learning format which includes interactive\, on-demand modules\, weekly assignments and instructor call-in sessions. Modules include instructional content\, interactive reviews\, video lab demonstrations conducted by an ISA Cybersecurity instructor and assessments. \n  \nYou will be able to: \n\nDiscuss the need and importance for control system security\nLearn about current principles and best practices\nUnderstand the structure and content of the ISA 99 / IEC 62443 series of documents\nDiscuss the principles behind the creating an effective long term program security\nLearn the basics of risk analysis\, industrial networking and network security\nUnderstand the concepts of defense in depth and zones and conduits\nLearn how to apply key risk mitigation techniques such as anti-virus\, patch management\, firewalls and virtual private networks\nLearn how secure software development strategies can make systems inherently more secure\nLearn what is being done to validate or verify the security of systems\n\n  \nYou will cover: \n\nPreparing for an Assessment\nCybersecurity Vulnerability Assessment\nConducting Vulnerability Assessments\nCyber Risk Assessments\nConducting Cyber Risk Assessments\nDocumentation and Reporting\nAnd more…\n\n  \nYou will be able to: \n\nIdentify and document the scope of the IACS under assessment\nSpecify\, gather or generate the cybersecurity information required to perform the assessment\nIdentify or discover cybersecurity vulnerabilities inherent in the IACS products or system design\nOrganize and facilitate a cybersecurity risk assessment for an IACS\nIdentify and evaluate realistic threat scenarios\nIdentify gaps in existing policies\, procedures and standards\nEstablish and document security zones and conduits\nPrepare documentation of assessment results\n\n  \nLab demonstrations: (Included in modules) \n\nCritiquing System Architecture Diagrams\nAsset Inventory\nGap Assessment\nWindows Vulnerability Assessment\nCapturing Ethernet Traffic\nPort Scanning\nWindows Vulnerability Scanning\nPerform a High-Level Cybersecurity Risk Assessment\nCreating a Zone & Conduit Diagram\nPerform a Detailed Cyber Risk Assessment\nRisk Assessment Report\n\n  \nWho should attend: \n\nControl systems engineers and managers\nSystem Integrators\nIT engineers and managers industrial facilities\nIT corporate/security professionals\nPlant Safety and Risk Management\n\n  \nRecommended Pre-Requisite: \nISA Course IC32\, IC32E or equivalent knowledge/experience. \n  \nWhat is included: \n\nOn-demand modules with video lab demonstrations included\n\nModule 1: Preparing for an Assessment (Approx. 95 minutes)\nModule 2: Cybersecurity Vulnerability Assessment (Approx. 35 minutes)\nModule 3: Conducting Vulnerability Assessments (Approx. 102 minutes)\nModule 4: Cyber Risk Assessments (Approx. 69 minutes)\nModule 5: Conducting Cyber Risk Assessments (Approx. 80 minutes)\nModule 6: Documentation (Approx. 15 minutes)\n\n\nA viewable version of ISA standards for course reference\n\nISA/IEC 62443-1-1\nISA/IEC 62443-2-1\nISA/IEC 62443-3-3\nISA/IEC 62443-2 (draft version)\n\n\nISA’s Cybersecurity Assessment Challenge – a Jeopardy-style review game which can be used as a review for the certification exam (Free Add-On)\nExam registration for ISA/IEC 62443 Cybersecurity Risk Assessment Specialist\nCourse Note Set and Syllabus\n\nRecommended Reading: \nCybersecurity Library \n  \nNot sure this particular course is for you? \nA pre-instructional survey is available for you to evaluate your level of understanding of the course material and to show you the types of questions you’ll be able to answer after completing the course. \n\n\n\n\n\n\n\n\n\n\n  \n\n\n\n\nInternational Society of Automation\n67 T.W. Alexander Drive\nPO Box 12277\nResearch Triangle Park\, NC 27709\nE-Mail: info@isa.org\nPhone: (919) 549-8411\nFax: (919) 549-8288\n\n\n\n\nAbout\nContact\nDo Not Sell My Info – CA Residents Only\nPrivacy Policy\nTerms & Conditions\n\n\n© 2020 International Society of Automation \n\n\n\n\n\nFacebook\n\n\nInstagram\n\n\nLinkedIn\n\n\nPinterest\n\n\nTwitter
URL:https://www.houstonisa.org/event/ic33e-assessing-the-cybersecurity-of-new-or-existing-iacs-systems/
CATEGORIES:Training,Cyber-Security
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20210122T080000
DTEND;TZID=America/Chicago:20210122T170000
DTSTAMP:20210122T090828Z
CREATED:20210122T090811Z
LAST-MODIFIED:20210122T090828Z
UID:10000023-1611302400-1611334800@www.houstonisa.org
SUMMARY:EN00E Certified Automation Professional CAP Exam Review Course
DESCRIPTION:Description: This self-paced\, online course reviews the knowledge and skill areas included on the Certified Automation Professional® (CAP®) certification program examination. The intent is to prepare an automation professional who meets the exam criteria to take the exam. The content is based on the Job Analysis Domains\, Tasks\, Knowledge Areas\, and Skill Areas developed as the basis for the CAP certification exam. This course is the recommended replacement for the discontinued CAP Learning System preparation tool\, as it incorporates content similarly included in that tool. \nMake sure to use HOUS2020 for $200 discount!\n  \nCertificate Program (if available) Certification of Completion: A Certificate of Completion indicating the total number of CEUs earned will be provided upon successful completion of the course. \n  \n  \n  \nYou will be able to:   \n  \n\nRecognize the scope and format of the CAP exam\nCompare process variable measurements and control valve selections\nExplain how the various types of control technologies are used in industrial automation\, including process control from basic to advanced control\, discrete\, batch\, motor\, and motion control\nAppreciate the range of digital communications used in automation\, and how these are used in system integration\nIdentify when safety instrumented systems (SISs) are needed and how they are specified\nAppreciate the importance of electrical issues that relate to grounding and noise\nDeal with the critical areas of automation opportunity identification and project justification\nIdentify the best practice methodology for automation project execution\n\n  \n  \n  \nYou will cover:  \n\n\n\n  \n\nPre-Examination\nModule 1: Introduction/CAP Basics\nModule 2: Process Instrumentation\n\n\nModule 3: Analytical Instrumentation\n\n\nModule 4: Continuous Control\nModule 5: Control Valves & Analog Communications\n\n\nModule 6: Control System Documentation & Equipment\nPractice Exam #1\n\n\nModule 7: Discrete I/O Devices & General Manufacturing Measurements\nModule 8: Motor & Drive Control\n\n\nModule 9: Motion Control\nModule 10: Process Modeling & Advanced Process Control\n\n\nModule 11: Batch Control\nModule 12: Alarm Management & Reliability\nPractice Exam #2\n\n\nModule 13: Process Safety & Safety Instrumented Systems\nModule 14: Electrical Installations & Electrical Safety\n\n\nModule 15: Digital Communications\nModule 16: Industrial Networks\n\n\nModule 17: MES Integration & Network Security\nModule 18: Operator Interface & Data Management\n\n\nModule 19: Software & Custom Software\nModule 20: Operator Training & Checkout\, System Testing & Startup\n\n\nModule 21: Troubleshooting\nModule 22: Automation Benefits\, Project Justification/Management and Interpersonal Skills\n\n\nFinal Examination
URL:https://www.houstonisa.org/event/en00e-certified-automation-professional-cap-exam-review-course/
CATEGORIES:Training,CapCcst-ExamReview
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20210125T080000
DTEND;TZID=America/Chicago:20210319T170000
DTSTAMP:20210117T080913Z
CREATED:20210117T080843Z
LAST-MODIFIED:20210117T080913Z
UID:10000118-1611561600-1616173200@www.houstonisa.org
SUMMARY:EC50E Safety Instrumented Systems: A Life-Cycle Approach
DESCRIPTION:Certification of Completion: A Certificate of Completion indicating the total number of CEUs earned will be provided upon successful completion of the course.Your course registration includes your registration for the exam. \nMake sure to use HOUS2020 for $200 discount!\nDescription \nISA’s CyberU online instructor-led training course offers the benefit of a high quality ISA training course with the added advantage of studying at your own pace in the office\, at home or while traveling. \nThis online course utilizes online training modules\, additional text materials\, online evaluations\, and email discussions. Students will have access via email to an instructor and have an opportunity to participate in live Q&A sessions with the instructor and other class participants. The course focuses on the engineering requirements for the specification\, design\, analysis\, and justification of safety instrumented systems for the process industries. Students will learn how to determine safety integrity levels and evaluate whether proposed or existing systems meet the performance requirements. \n  \nThis CyberU course runs for eight (8) weeks. You will have access to seven online modules for a web/audio session. Each module takes approximately 60 minutes. Your course syllabus will guide you through the course modules\, provide assignments\, and the schedule for live Q & A sessions. \n  \nYou will be able to: \n\nDefine safety instrumented system.\nDiscuss how regulations have resulted through lessons learned from high profile process industry accidents.\nDetermine which ANSI/ISA\, AIChE\, and IEC guidelines and standards are relevant in industry.\nIdentify the Scope of ISA 61511\nDiscuss strategies for the management of functional safety\nIdentify the stages of the safety design life cycle.\nIdentify available safety layers for an IACS\nDiscuss the importance of “defense in depth” concept\nIdentify how SISs are used to reduce risk.\nCategorize risk using a PHA\nDetermine SIL using qualitative methods\nDetermine performance requirements for each SIL\nConduct a LOPA\nDiscuss LOPA methodology\nDevelop guidelines for LOPA\nDetermine risk tolerance\nIdentify resources for cyber security in an IACS\nIdentify failure modes and the risks involved with each\nIdentify hardware modeling techniques (SIL verification.)\nExplain the impact of redundancy on failure rates.\nDemonstrate the use of fault tolerance tables.\nDevelop an SRS\nExplain the pros and cons of relay logic systems\nExplain the pros and cons of microprocessor systems (PLC)\nDiscuss the pros and cons of pneumatic systems\nIdentify typical field devices in an IACS\nDiscuss impact of field devices on system performance\nExplain Center for Internet Security (CIS) Benchmarks\nExplain pros and cons of using certification vs prior use devices.\nExplain the FAT process.\nExplain installation and commissioning process.\nExplain the validation process\nIdentify priorities of the operation and maintenance phase.\nIdentify safety requirements for MOC\nIdentify documents to maintain for SRS\n\n  \nYou will cover: \nEach course module has been pre-recorded by your instructor\, so that you can access on your schedule. Each module is a web/audio session that takes approximately 60 minutes. \nModule 1/Week 1: Background\, Scope\, Management Issues\, The Life Cycle \nCovers high profile process industry accidents\, the legislation that resulted and various lessons learned \nModule 2/Week 2: Hazard and Risk assessment\, Selecting SILs \nCovers concepts and benefit of independent safety layers\, hazard identification\, risk assessment and safety integrity levels (SIL) \nModule 3/Week 3: Layer Of Protection Analysis (LOPA) and cybersecurity \nCovers the semi-quantitative method of determining safety integrity levels called LOPA \nModule 4/Week 4: Reliability and Modeling Issues \nCovers reliability issues and helps make sense of the minimum hardware fault tolerance requirement tables in the standard \nModule 5/Week 5: SRS and Logic Solver Technologies \nCovers the safety requirements specification (SRS) and the pros and cons of pneumatic\, relay and microprocessor logic systems \nModule 6/Week 6: Field Devices\, Certification\, Misc Design Issues \nCovers field devices\, their impact and the differences between using certified vs. proven-in-use devices. \nModule 7/Week 7: FAT and beyond \nCovers factory acceptance testing\, installation\, commission\, validation\, operations\, maintenance\, testing\, bypassing and management of change \n  \nCourse materials: \nCourse materials will be provided to all course registrants prior to the course start date. \n\nCourse noteset with slides from course modules and course syllabus\nOnline access to ISA/IEC 61511 standards for the duration of the course\nTextbook Included:\n\n  \n\n\n\n\n\nSafety Instrumented Systems: A Life Cycle Approach\nBy Paul Gruhn\, PE\, CFSE and Simon Lucchini\, CFSE\, MIEAust CPEng\n\n\n\n\n  \nFeatures of ISA CyberU online course: \nOnline Pre-recorded Course Modules \nYour instructor has pre-recorded each course module so that you can access the course presentations on your schedule. Each module is a web/audio session that takes approximately 60 minutes. \n  \nAsk the Expert \nInteract with your expert instructor\, via email throughout the course and through scheduled live Q& A sessions. You can expect a reply to your email within 24 hours. This email address is active during the entire course duration. \nThe Q&A sessions provide an opportunity for you and your classmates to speak one-on-one with the instructor. You will have an opportunity to ask any questions you may have about the course material and interact with your fellow classmates. \n  \nClass Discussions \nYou will be invited to subscribe to a course listserve that includes course participants. You can use this listserve to post questions and share experience relevant to the course with other class members. \n  \nCourse Assignments and Exams \n\nTake the course pre-test before you begin studying the course material to get a better understanding of areas that you will want to focus on more during the course.\nHomework assignments for all modules will be indicated on the syllabus. The homework assignments are designed to help expand your understanding of the course material.\nComplete the final exam for the course in order to receive Continuing Education Units (CEU) credit. The final exam will be taken and scored online. You must receive at least 80% on the course exam to receive CEU credit.\nContinuing Education Units (CEU) credits are awarded to all students who successfully complete the final course exam.
URL:https://www.houstonisa.org/event/ec50e-safety-instrumented-systems-a-life-cycle-approach/
CATEGORIES:Training,Safety
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20210125T080000
DTEND;TZID=America/Chicago:20210319T170000
DTSTAMP:20210117T081052Z
CREATED:20210117T081052Z
LAST-MODIFIED:20210117T081052Z
UID:10000119-1611561600-1616173200@www.houstonisa.org
SUMMARY:ES10E Applying Instrumentation in Hazardous Locations
DESCRIPTION:Certification of Completion: A Certificate of Completion indicating the total number of CEUs earned will be provided upon successful completion of the course. \nMake sure to use HOUS2020 for $200 discount!\nISA’s online instructor-assisted training courses offer the benefit of a high quality ISA training course with the added advantage of studying at your own pace in the office\, at home\, or while traveling. \n  \nThis online course utilizes pre-recorded training modules\, additional video/simulation modules\, as well as e-mail and live discussions. Students will have access via email to an instructor throughout the course\, as well as a listserve to communicate with other students in the class. \n  \nThis online\, self-paced course runs for eight (8) weeks. You will have access to 11 online modules\, each taking approximately 60 minutes. Your course syllabus will guide you through the course modules and provide assignments and opportunities to interact with the instructor and other course participants. \n  \nDescription: \nThis self-paced\, online course provides a systematic approach to specifying and implementing instrumentation in hazardous locations. Related standards from National Fire Protection Association (NFPA)\, National Electrical Manufacturers Association (NEMA)\, International Electrotechnical Commission (IEC)\, American Petroleum Institute (API)\, and ISA are discussed. \n  \nYou will be able to: \n\nIdentify process and environmental factors that determine classification\nDescribe and use procedures for electrical classification\nUse applicable standards to develop classification drawings for gases\, dusts\, and fibers\nDescribe the basic principles of protection\nSelect explosion proof apparatus for specific applications\nDetermine when and why explosion seals should be used\nSpecify the use of intrinsically safe and nonincendive systems\nSelect the appropriate protective techniques for different hazards\nSelect alternative protective techniques for reduced cost\nSpecify devices\, design methods and safe construction approaches per National Electrical Code NFPA 70\nPrepare electrical maintenance plans in these classified areas per National Electric Recommended Practice NFPA 70B\nPerform safe operation in these classified areas per National Electric Standard for Work Place Safety NFPA 70E\n\n  \nYou Will Cover: \nPre-Exam \nStudents are asked to take the pre-exam\, which includes questions related to the subject matter areas. Answers will be provided for students to assess their knowledge\, prior to beginning the course material. \nWEEK 1 – Module 1: Introduction & Location Classification Standards \nWEEK 2 – Module 2:   Class I Division & Zone Classification \nWEEK 3 – Modules 3: Class I Zone (Alternative) & Class II Division Classifications \nWEEK 4 – Module 4:   Class III Division & Zone Classification for Dusts and Module 5: Protection Technique Standards & Enclosure Types \nWEEK 5 – Module 6:   Explosion Proof Enclosures & Module 7: Intrinsic Safety \nWEEK 6 – Module 8:   Non-incendive Systems & Module 9: Pressurization & Purging \nWEEK 7 – Module 10: Other Types of Protection & Module 11: Maintenance Considerations \nWEEK 8 – Final Examination \n  \nClassroom Materials: \n\nCourse noteset with slides from course modules and course syllabus\nISA Standards: ANSI/ISARP12.06.01-2003 – Intrinsic Safety; ANSI/ISATR12.24.01-1998 (IEC 60079-10 Mod) – Class I\, Zones 0\, 1\, and 2; ANSI/ISA12.01.01-1999 – Definitions and ANSI/ISA12.12.01-2000 – Non-incendive\n\n  \nFeatures of ISA CyberU online course: \n  \nOnline Pre-recorded Course Modules \nYour instructor has pre-recorded each course module so that you can access the course presentations on your schedule. Each module is a web/audio session that takes approximately 60 minutes. \n  \nAsk the Expert \nInteract with your expert instructor\, via email throughout the course and through scheduled live Q& A sessions. You can expect a reply to your email within 24 hours. This email address is active during the entire course duration. \nThe Q&A sessions provide an opportunity for you and your classmates to speak one-on-one with the instructor. You will have an opportunity to ask any questions you may have about the course material and interact with your fellow classmates. \n  \nClass Discussions \nYou will be invited to subscribe to a course listserve that includes course participants. You can use this listserve to post questions and share experience relevant to the course with other class members. \n  \nCourse Assignments and Exams \n\nTake the course pre-test before you begin studying the course material to get a better understanding of areas that you will want to focus on more during the course.\nHomework assignments for all modules will be indicated on the syllabus. The homework assignments are designed to help expand your understanding of the course material.\nComplete the final exam for the course in order to receive Continuing Education Units (CEU) credit. The final exam will be taken and scored online. You must receive at least 80% on the course exam to receive CEU credit.\nContinuing Education Units (CEU) credits are awarded to all students who successfully complete the final course exam.
URL:https://www.houstonisa.org/event/es10e-applying-instrumentation-in-hazardous-locations/
CATEGORIES:Training,Safety
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20210125T080000
DTEND;TZID=America/Chicago:20210319T170000
DTSTAMP:20210122T085624Z
CREATED:20210122T085342Z
LAST-MODIFIED:20210122T085624Z
UID:10000017-1611561600-1616173200@www.houstonisa.org
SUMMARY:IC32E Using the ISA/IEC 62443 Standard to Secure Your Control Systems
DESCRIPTION:A detailed look at how the ISA/IEC 62443 (formerly ISA 99) Standards can be used to protect your critical control systems. It also explores the procedural and technical differences between the security for traditional IT environments and those solutions appropriate for SCADA or plant floor environments. The course explores the move to using open standards such as Ethernet\, TCP/IP\, and web technologies in SCADA and process control networks that has begun to expose these systems to the same cyber-attacks that have wreaked so much havoc on global government and corporate information systems. \nMake sure to use HOUS2020 for $200 discount!\nCertification of Completion: A Certificate of Completion indicating the total number of CEUs earned will be provided upon successful completion of the course. \nPart of the ISA/IEC 62443 Cybersecurity Certificate Program \nYour course registration includes your registration for the exam. \n  \nISA’s CyberU online instructor-led training courses offer the benefit of a high quality ISA training course with the added advantage of studying at your own pace in the office\, at home\, or while traveling. \n  \nThis online course utilizes online training modules\, additional text materials\, online evaluations\, and e-mail discussions. Students will have access via email to an instructor and an opportunity to participate in live Q&A sessions with the instructor and other class participants. \n  \nThis CyberU course runs for eight (8) weeks. You will have access to twelve online modules for the web/audio sessions. Each module is between 20 to 60 minutes. Your course syllabus will guide you through the course modules and provide assignments and the schedule for the live Q&A sessions. \n  \nDescription \nA detailed look at how the ISA/IEC 62443 (formerly ISA 99) Standards can be used to protect your critical control systems. It also explores the procedural and technical differences between the security for traditional IT environments and those solutions appropriate for SCADA or plant floor environments. The course explores the move to using open standards such as Ethernet\, TCP/IP\, and web technologies in SCADA and process control networks that has begun to expose these systems to the same cyber-attacks that have wreaked so much havoc on global government and corporate information systems. \n  \nYou will be able to: \n\nDiscuss the need and importance for control system security\nLearn about current principles and best practices\nUnderstand the structure and content of the ISA 99 / IEC 62443 series of documents\nDiscuss the principles behind the creating an effective long term program security\nLearn the basics of risk analysis\, industrial networking and network security\nUnderstand the concepts of defense in depth and zones and conduits\nLearn how to apply key risk mitigation techniques such as anti-virus\, patch management\, firewalls and virtual private networks\nLearn how secure software development strategies can make systems inherently more secure\nLearn what is being done to validate or verify the security of systems\n\n  \nYou will cover: \n  \nModule 1: Using the ISA/IEC 62443 Standards to Secure Your Control Systems \nProvides a basic introduction to control system cyber security and the ISA/IEC 62443 standards. Discussion of trends\, regulations\, industry standards and best practices\, common myths\, the ISA 99 committee\, and the structure of the ISA 62443 standard. Topics include: Self-assessment of your Control Systems Security knowledge\, Trends in control system cybersecurity\, Potential Impacts\, Five common myths regarding IACS Security\, Regulations and Standards\, ISA99 committee work. \n  \nModule 2: Terminology\, Concepts\, Models and Metrics \nCovers the material in ISA 62443-1-1 (published as ISA-99.00.01:2007) that forms the basis for the ISA 62443 series of standards. Topics include: Difference between IT and IACS\, Security Objectives\, Defense-in-Depth\, Risk Assessment\, Policies\, Zones & Conduits\, Security Levels and the Security Lifecycle Models \n  \nModule 3: Threats and Vulnerabilities \nProvides a basic introduction to networking with a focus on the application of Ethernet in the industrial environment. Topics include: Types of networks\, OSI reference model\, Network Devices\, Network Protocols\, Network Tools built into Operating Systems. \n  \nModule 4: Industrial Networking Basics L1-L3 \nBuilds on the previous module and covers networking with a focus on the upper layers of the OSI reference model\, problems with the OSI model\, network discovery\, and security auditing tools in the industrial environment. Topics include: Encapsulating data\, OSI reference model\, Network Devices\, Network Protocols. \n  \nModule 5: Network Security Basics 101 \nProvides a basic introduction to network security. Topics include: Security Appliances\, Network Segmentation\, Encryption\, Secure Protocols and Intrusion Detection. Topics include: Why address security? Firewalls\, Network Segmentation Architectures\, Encryption\, Intrusion Detection\, Monitoring Network Traffic. \n  \nModule 6: Industrial Protocols \nCovers at a high level the structure and application of common industrial protocols such as MODBUS\, PROFIBUS\, OPC and CIP (EtherNet/IP). Topics include: What is a protocol? Multitude of Industrial Protocols\, Ports in use. \n  \nModule 7: Establishing an Industrial Automation and Control Systems Security Program \nCovers the material in ISA 62443-2-1 (published as ISA-99.02.01:2009) that specifies the elements and requirements of an IACS Cyber Security Management System (CSMS). Topics include: Six top level activities\, Common pitfalls\, Risk Analysis\, Security Policy\, Organization and Awareness\, Personnel security\, Physical & Environmental Security\, Network Segmentation\, Access Control\, Change Management\, Patch and Anti-virus management\, Information management\, Incident Response and Disaster Recover Planning\, Compliance Monitoring\, and Program Maintenance. \n  \nModule 8: Security Risk Assessment and System Design \nCovers Security Level definitions and Foundational Requirements that establish a basis for the requirements in scoping an IACS assessment\, establishing zones & conduits\, analyzing the security risk for each zone\, assigning a security level target to each zone and verifying the design satisfies the security level target. Topics include: Definitions\, Risk Equation\, Cyber Risk Reduction Factor\, Basic Security analysis tools\, Identification of Zones and Conduits. \n  \nModule 9: Intro to the IACS Cybersecurity Lifecycle \nShort jaunt into the Assess\, Develop & Implement and Maintain phases of the IACS Cybersecurity Lifecycle. These phases are covered more in depth in ISA’s IC33\, IC34 & IC37 courses. Topics include: Cyber Security Life Cycle diagram\, Phases\, Continuous processes. \n  \nModule 10: Security Program Requirements for IACS Service Providers \nCreating a secure product out of the box is only a small piece of the security puzzle. Asset Owners\, Integrators and Suppliers all have a role. This module covers how IEC 62443-2-4 specifies requirements IACS service providers can offer to the asset owner during integration and maintenance activities of an Automation Solution. Topics include: IACS Patching\, Asset Owner Requirements\, Product Supplier/Service Provider Requirements\, Malicious Code Protection. \n  \nModule 11: Developing Secure Products and Systems \nOverview of component tier Product Development Requirements and Technical Security Requirements for IACS that are Product supplier centric. Topics include: Component tier standards ISA-62443-4-1 & ISA-62443-4-2\, Primary & Secondary goals\, ISA 62443 relationships\, ISA Security Compliance Institute (ISCI)\, ISASecure™. \n  \nModule 12: Evolving Security Standards and Practices \nStandards are voluntary documents unless there is a requirement to use them. In this module\, we look at the continuously evolving industrial security regulatory landscape. The only constant is change! Topics include: Normative and Informative elements\, NIST Cyber Security Framework\, ISA-62443-2-1 requirement to monitor and evaluate applicable legislation relevant to cyber security\, Standards Development Organizations (SDOs). \n  \nCourse Materials (PDF format): \n\nIC32E v2.0 Course Syllabus\nIC32E v2.0 Noteset Volume I with sections on Course Presentation slides from course modules\, Instructional Surveys/Answers and Additional Resources\nIC32E v2.0 Noteset Volume II with the following three publications\nANSI / ISA 99.00.01-2007 / IEC 62443-1-1: Security for Industrial Automation and Control Systems Part 1: Terminology\, Concepts\, and Models (Approved 29 October 2007)\nANSI / ISA 99.00.02-2009 / IEC 62443-2-1: Security for Industrial Automation and Control Systems Part 2: Establishing an Industrial Automation and Control System Security Program\nISA-62443.03.03 / IEC 62443-3-3: Security for Industrial Automation and Control Systems: System Security Requirements and Security Assurance Levels\nTextbook: Industrial Automation by Ronald L. Krutz (Second Edition)\n\n  \nFeatures of ISA CyberU online course: \nOnline Pre-recorded Course Modules \nYour instructor has pre-recorded each course module so that you can access the course presentations on your schedule. Each module is a web/audio session that takes approximately 20 – 60 minutes. \n  \nAsk the Expert \nInteract with your expert instructor via email throughout the course and through scheduled live Q&A sessions. You can expect a reply to your email within 24 hours. This email address is active during the entire course duration. \nThe Q&A sessions provide an opportunity for you and your classmates to speak one-on-one with the instructor. You will have an opportunity to ask any questions you may have about the course material and interact with your fellow classmates. \n  \nClass Discussions \nYou will be invited to subscribe to a course listserve that includes course participants. You can use this listserve to post questions and share experience relevant to the course with other class members. \n  \nCourse Assignments and Exams \n\nTake the course pre-test before you begin studying the course material to get a better understanding of areas that you will want to focus on more during the course.\nHomework assignments for all modules will be indicated on the syllabus. The homework assignments are designed to help expand your understanding of the course material.\nComplete the final exam for the course in order to receive Continuing Education Units (CEU) credit. The final exam will be taken and scored online. You must receive at least 80% on the course exam to receive CEU credit. (Note this exam is not the ISA/IEC 62443 Cybersecurity Fundamentals Specialist Exam)\n\nRecommended Reading: \nCybersecurity Library \n  \nNot sure this particular course is for you? \nA pre-instructional survey is available for you to evaluate your level of understanding of the course material and to show you the types of questions you’ll be able to answer after completing the course.
URL:https://www.houstonisa.org/event/ic32e-using-the-isa-iec-62443-standard-to-secure-your-control-systems/
CATEGORIES:Training,Cyber-Security
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20210201T080000
DTEND;TZID=America/Chicago:20210319T170000
DTSTAMP:20210122T090042Z
CREATED:20210122T090042Z
LAST-MODIFIED:20210122T090042Z
UID:10000019-1612166400-1616173200@www.houstonisa.org
SUMMARY:IC40E Batch Control Using the ANSI/ISA88 Standards
DESCRIPTION:Certification of Completion: A Certificate of Completion indicating the total number of CEUs earned will be provided upon successful completion of the course. \nMake sure to use HOUS2020 for $200 discount!\nDescription: \nThis course presents an approach to developing functional requirements/specifications using the models and terminology defined in the ANSI/ISA88 batch control standards. A review of the characteristics of batch manufacturing systems is included. Participants will explore the ANSI/ISA88 concept that separates the recipe from the equipment. This course includes a methodology that defines an object approach based on ANSI/ISA88 that promotes the reuse of these objects from one project to the next. \n  \nYou will be able to: \n\nSpecify the requirements for a batch control system\nEffectively structure and subdivide equipment entities\nDefine procedural elements that can be effectively used with the above equipment entities\nDescribe modes and states and how they are applied at the equipment level\nDevelop phase logic that executes in equipment and that can deal with both normal and abnormal operations\nRecognize the various control languages that are available\nIdentify the alternative architectures for programmable logic controllers (PLCs)\, distributed control systems (DCSs)\, and PC-based control systems\nDescribe the interfaces that are needed between batch control and other systems within an enterprise\n\n  \nYou Will Cover: \nPre-Exam \nStudents are asked to take the pre-exam\, which includes questions related to the subject matter areas. Answers will be provided for students to assess their knowledge\, prior to beginning the course material. \nWEEK 1 – \n•    Module 1: Overview of ANSI/ISA88 \nWEEK 2 – \n•    Module 2: Physical Model – Part 1 \n•    Module 3: Physical Model – Part 2 \nWEEK 3 – \n•    Module 4: Physical Model – Part 3 \nWEEK 4 – \n•    Module 5: Recipes – Part 1 \n•    Module 6: Recipes – Part 2 \nWEEK 5 – \n•    Module 7: Equipment Phase Logic \nWEEK 6 – \n•    Module 8: Activity Model \n•    Module 9: Designing Batch Systems \n•    Module 10: ISA & Other Batch Standards \nWEEK 7 – \n•    Final Examination \n  \nCourse Materials: \n\nCourse noteset with slides from course modules and course syllabus\nANSI/ISA88.01-1995 (R2006) – Batch Control Part 1: Models and Terminology\nANSI/ISA88.00.02-2001 – Batch Control Part 2: Data Structures and Guidelines for Languages\nANSI/ISA88.00.03-2003 – Batch Control Part 3: General and Site Recipe Models and Representation\n\n  \nFeatures of ISA CyberU online course: \nOnline Pre-recorded Course Modules  \nYour instructor has pre-recorded each course module so that you can access the course presentations on your schedule. Each module is a web/audio session that takes approximately 60 minutes. \n  \nAsk the Expert  \nInteract with your expert instructor\, via email throughout the course and through scheduled live Q& A sessions. You can expect a reply to your email within 24 hours. This email address is active during the entire course duration. \n  \nThe Q&A sessions provide an opportunity for you and your classmates to speak one-on-one with the instructor. You will have an opportunity to ask any questions you may have about the course material and interact with your fellow classmates. \n  \nClass Discussions  \nYou will be invited to subscribe to a course discussion group that includes course participants. You can use this discussion group to post questions and share experience relevant to the course with other class members. \n  \nCourse Assignments and Exams \nTake the course pre-test before you begin studying the course material to get a better understanding of areas that you will want to focus on more during the course. \n  \nHomework assignments for all modules will be indicated on the syllabus. The homework assignments are designed to help expand your understanding of the course material. \n  \nComplete the final exam for the course in order to receive Continuing Education Units (CEU) credit. The final exam will be taken and scored online. \nYou must receive at least 80% on the course exam to receive CEU credit. \n  \nContinuing Education Units (CEU) credits are awarded to all students who successfully complete the final course exam. \n  \nNot sure this particular course is for you? \nA pre-instructional survey is available for you to evaluate your level of understanding of the course material and to show you the types of questions you’ll be able to answer after completing the course.
URL:https://www.houstonisa.org/event/ic40e-batch-control-using-the-ansi-isa88-standards/
CATEGORIES:Training,Ansi-ISA95
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20210201T080000
DTEND;TZID=America/Chicago:20210319T170000
DTSTAMP:20210122T091153Z
CREATED:20210122T090220Z
LAST-MODIFIED:20210122T091153Z
UID:10000020-1612166400-1616173200@www.houstonisa.org
SUMMARY:IC55E Implementing Business to MES Integration Using the ANSI/ISA95 Standards
DESCRIPTION:  \n\n\n\n\n\n\n\n\n\nCertification of Completion: A Certificate of Completion indicating the total number of CEUs earned will be provided upon successful completion of the course. \nMake sure to use HOUS2020 for $200 discount!\nDescription: \nThis course introduces the fundamental concepts of the ANSI/ISA95 standards so that students can apply them to implementing an integration between plant manufacturing systems and business systems. \n  \nBy understanding the object models and information flows defined in the ANSI/ISA95 standards\, you will have the tools you need to specify\, design\, and execute a successful business to manufacturing integration project. \n  \nThis course is ideal for Integration Project Managers; Manufacturing Information Systems Analysts; Information Design Engineers and IT Professionals. \n  \nYou will be able to: \n\nSpecify the requirements for an enterprise/control integration solution\nIdentify the issues involved in the integration of logistics to manufacturing control\nIdentify the business processes that need information from manufacturing systems\nIdentify the manufacturing control processes that need information from business systems\nExplain the business drivers involved in integration\nIdentify the detailed information associated with enterprise/control integration\nDiscuss the roles of UML\, XML\, and B2MML in vertical integration\nApply the ISA95 object models\n\n  \nYou will cover: \n\nStandards and Models: ANSI/ISA95 Standards | MESA International Model | WBF B2MML XML Schemas\nBusiness Processes: Procurement | Product Cost Accounting | Product Inventory Control | Maintenance | Production Planning and Scheduling\nProduction Processes: Detailed Production Scheduling | Production Tracking | Production Resource Management | Product Defination Management\nInformation Model: Production Resources | Process Segments | Product Definition and Capability | Production Schedules | Production Performance\n\n  \nClassroom/Laboratory Exercises: \n\nIdentify key business drivers for integration\nIdentify key business processes and objects\nIdentify process segment definitions\nDevelop shared product definition information\n\n  \nCourse Schedule/Outline: \nPre-Exam \nStudents are asked to take the pre-exam\, which includes questions related to the subject matter areas. Answers will be provided for students to assess their knowledge\, prior to beginning the course material. \nWEEK 1 – \n\nModule 1: Overview and Introduction\n\nWEEK 2 – \n\nModule 2: Domain Model\nModule 3: Functions\, Activities and Data Flow\n\nWEEK 3 – \n\nModule 4: Major Object Definitions\nModule 5: Operations Definitions Model\n\nWEEK 4 – \n\nModule 6: Overview and Review\nModule 7: UML and XML\n\nWEEK 5 – \n\nModule 8: Modeling the Objects\n\nWEEK 6 – \n\nModule 9: Models of Exchanged Information\nModule 10: Implementing ISA95\n\nWEEK 7 – \n\nFinal Examination\n\n  \nCourse Materials: \nCourse noteset with slides from course modules and course syllabus \nIncludes ISA Standards: \n\nANSI/ISA95.00.01-2010\nANSI/ISA95.00.02-2010\nANSI/ISA95.00.03-2013\nANSI/ISA95.00.04-2012\nANSI/ISA95.00.05-2013\nANSI/ISA95.00.06-2014\n\n  \nRecommended Reading: \n\nThe Road to Integration: A Guide to Applying the ISA-95 Standard in Manufacturing\, Bianca Scholten\nThe Hitchhiker’s Guide to Manufacturing Operations Management: ISA-95 Best Practices Book 1.0\, Charlie Gifford\nDesign Patterns for Flexible Manufacturing\, Dennis Brandl\n\n  \nNot sure this particular course is for you? \nA pre-instructional survey is available for you to evaluate your level of understanding of the course material and to show you the types of questions you’ll be able to answer after completing the course. \n\n\n\n\n\n\n\n\n\n\n  \n\n\n\n\nInternational Society of Automation\n67 T.W. Alexander Drive\nPO Box 12277\nResearch Triangle Park\, NC 27709\nE-Mail: info@isa.org\nPhone: (919) 549-8411\nFax: (919) 549-8288\n\n\n\n\nAbout\nContact\nDo Not Sell My Info – CA Residents Only\nPrivacy Policy\nTerms & Conditions\n\n\n© 2020 International Society of Automation \n\n\n\n\n\nFacebook\n\n\nInstagram\n\n\nLinkedIn\n\n\nPinterest\n\n\nTwitter
URL:https://www.houstonisa.org/event/ic55e-implementing-business-to-mes-integration-using-the-ansi-isa95-standards/
CATEGORIES:Training,Ansi-ISA95
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20210201T080000
DTEND;TZID=America/Chicago:20210430T170000
DTSTAMP:20210115T055022Z
CREATED:20210115T054544Z
LAST-MODIFIED:20210115T055022Z
UID:10000117-1612166400-1619802000@www.houstonisa.org
SUMMARY:Certified Control Systems Technician (CCST) Level II Exam Review Course (TS02E - Online)
DESCRIPTION:Certification of Completion: A Certificate of Completion indicating the total number of CEUs earned will be provided upon successful completion of the course. \nMake sure to use HOUS2021 for $200 discount\nISA’s online instructor-assisted training courses offer the benefit of a high quality ISA training course with the added advantage of studying at your own pace in the office\, at home\, or while traveling. \nThis online course utilizes pre-recorded training modules\, homework/practice exercises\, as well as e-mail and live discussions. Students will have access via email to an instructor throughout the course\, as well as a discussion group to communicate with other students in the class. \n  \nThis online\, self-paced course runs for thirteen (13) weeks. You will have access to 25 online modules\, each taking approximately 60 minutes. Your course syllabus will guide you through the course modules and provide assignments and opportunities to interact with the instructor and other course participants. \n  \nDescription: \nThis is a fast-paced review of the knowledge and skills necessary for technicians with 7+ years of practical experience who are preparing to sit for the CCST Level II exam. An explanation of the requirements\, examination process and practice certification-type exams are provided. \n  \nYou will be able to:\n\nIdentify any need for further study or training in specific knowledge areas\nEvaluate control systems tuning and system response to changes in control parameters\nDefine system documentation and symbology to effectively troubleshoot instrumentation\, control loops\, and electrical and pneumatic installations\nIdentify electrical or hazard area classifications and determine appropriate procedures to be followed for safe and effective operation\nDescribe the isolation of a process component from an operational system to perform proper testing\, maintenance\, or troubleshooting\nExplain the process to identify and correct problems that may arise during the commissioning of control systems\nVerify final control element functionality through manipulated variables using controller mode and output functions\nEvaluate installed industrial network data and performance using network diagnostic tools\nExplain multi-step troubleshooting methodology\n\n  \nYou Will Cover:\nPre-Exam \nStudents are asked to take the pre-exam\, which includes questions related to the subject matter areas. Answers will be provided for students to assess their knowledge\, prior to beginning the course material. \nWEEK 1 – \n•    Module 1A: Overview of CCST Program \n•    Module 1B & 1C: ISO 9000/Concepts of Process Control \n•    Module 2: Instrument Air \nWEEK 2 – \n•    Module 3: P&ID Basics \n•    Module 4: Basic Measuring Units \n•    Module 5: Instrument Fundamentals/Temperature \nWEEK 3 – \n•    Module 6: Pressure/Flow \n•    Module 7: Level \nWEEK 4 – \n•    Module 8: Analyzers & Final Control Elements \n•    Module 9: Safety & Electricity \nWEEK 5 – \n•    Module 10: Advancing Technologies & Numbering Systems \n•    Module 11: PLC Basics & Basic Requirements for Protocol \n•    Module 12: Fieldbus & Communications Protocol \nWEEK 6 – \n•    Module 13: Fiber Optics & SCADA \nWEEK 7 – \n•    Module 14: Process Dynamics \n•    Module 15: Control Action \n•    Module 16: PID \nWEEK 8 – \n•    Module 17: Tuning \n•    Module 18: Advanced Control Strategy \nWEEK 9 – \n•    Module 19: Calibration \n•    Module 20: Instrument Performance \nWEEK 10 – \n•    Module 21: Pressure Test/Calibration Equipment & Instrument Maintenance \n•    Module 22: Best Procedures for LANs & Troubleshooting w/ Statistics \nWEEK 11 – \n•    Module 23: Tools & DCS Troubleshooting \nWEEK 12 – \n•    Module 24: Hazardous Locations & Installation \n•    Module 25: Start Up & Loop Checking \nWEEK 13 – \n•    Final Examination \n  \nClassroom Materials:\n\nCourse noteset with slides from course modules and course syllabus\nCCST Level II Study Guide\, ISA\n\n  \nFeatures of ISA CyberU online course: \nOnline Pre-recorded Course Modules\nYour instructor has pre-recorded each course module so that you can access the course presentations on your schedule. Each module is a web/audio session that takes approximately 60 minutes. \n  \nAsk the Expert\nInteract with your expert instructor\, via email throughout the course and through scheduled live Q& A sessions. You can expect a reply to your email within 24 hours. This email address is active during the entire course duration. \n  \nThe Q&A sessions provide an opportunity for you and your classmates to speak one-on-one with the instructor. You will have an opportunity to ask any questions you may have about the course material and interact with your fellow classmates. \n  \nClass Discussions\nYou will be invited to subscribe to a course listserve that includes course participants. You can use this listserve to post questions and share experience relevant to the course with other class members. \n\nCourse Assignments and Exams\nTake the course pre-test before you begin studying the course material to get a better understanding of areas that you will want to focus on more during the course. \n  \nHomework assignments for all modules will be indicated on the syllabus. The homework assignments are designed to help expand your understanding of the course material. \n  \nComplete the final exam for the course in order to receive Continuing Education Units (CEU) credit. The final exam will be taken and scored online. \n  \nYou must receive at least 80% on the course exam to receive CEU credit. \n  \nContinuing Education Units (CEU) credits are awarded to all students who successfully complete the final course exam. \n  \nNote: The final course exam is different from the actual certification exam\, which must be registered for separately.
URL:https://www.houstonisa.org/event/certified-control-systems-technician-ccst-level-ii-exam-review-course-ts02e-online/
CATEGORIES:Training,CapCcst-ExamReview
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20210203T113000
DTEND;TZID=America/Chicago:20210203T123000
DTSTAMP:20210120T180128Z
CREATED:20210120T175957Z
LAST-MODIFIED:20210120T180128Z
UID:10000120-1612351800-1612355400@www.houstonisa.org
SUMMARY:Transformational Changes in Automation: Focus on Open Process Automation
DESCRIPTION:Abstract: \nThe hypothesis that transformation change is underway in process automation can be confirmed with the following evidence:\n• ISA’s new Smart Manufacturing and IIoT Division\n• Publication of Version 2.1 of the Open Process Automation Standard (O-PAS™) and the startup of O-PAS™ conformance certification\n• NAMUR Open Architecture and Module Type Package \nThe first part of this talk will overview these trends and discuss ISA’s role in Digital Transformation. \nThe second part of the talk will focus on Open Process Automation. We will discuss the status of the O-PAS™ standard and its associated conformance certification process. Also\, information on four end user company driven O-PAS™ system prototyping projects will be presented. \nPresenter: \nDon Bartusiak\nPresident\, Collaborative Systems Integration\nCo-Chair\, Open Process Automation Forum of The Open Group \nDon Bartusiak is President of Collaborative Systems Integration\, an Austin-based startup providing systems integration services and software products for Open Process Automation (O-PAS™) based systems. \nIn Oct 2020\, he retired from ExxonMobil Research and Engineering as Chief Engineer\, Process Control. He has 33 years of experience in process control with ExxonMobil\, and 7 years of experience in process development research with Bethlehem Steel. At ExxonMobil\, he has been a process control application engineer working on artificial intelligence\, linear and nonlinear model predictive control\, and real-time optimization at facilities in the U.S. and U.K in central engineering offices and in manufacturing. From the mid-1990s\, he held supervisory or senior technical positions with responsibility for instrumentation\, process analyzers\, control systems\, and control applications at facilities in Texas and Virginia. From 2000 to 2002\, he was Lecturer and Adjunct Professor of Chemical Engineering at Rice University. \nDon received a B.S. (ChemE) from the University of Pennsylvania and M.S. and Ph.D (ChemE) degrees from Lehigh University. \n \nINSTRUCTIONS: \nDownload and install Zoom software if necessary \nThe day before the meeting you will receive an email with the meeting ID and password \nYou may join the meeting starting at approximately 11:00 am for socializing and announcements \nThe presentation will begin at 11:30 am
URL:https://www.houstonisa.org/event/transformational-changes-in-automation-focus-on-open-process-automation/
CATEGORIES:Event,ISA Houston Section Program
ATTACH;FMTTYPE=image/jpeg:https://www.houstonisa.org/wp-content/uploads/2019/09/training-default.jpg
ORGANIZER;CN="Clifford D. Wuertz":MAILTO:cdwuertz@gmail.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20210208T080000
DTEND;TZID=America/Chicago:20210507T170000
DTSTAMP:20210122T091334Z
CREATED:20210122T090440Z
LAST-MODIFIED:20210122T091334Z
UID:10000021-1612771200-1620406800@www.houstonisa.org
SUMMARY:FG05E Fundamentals of Industrial Process\, Measurement & Control Online
DESCRIPTION:Description: This self-paced\, online course provide an overview of industrial measurement and control for technician\, engineers\, and managers providing a basic understanding and foundation for communication with other control systems professionals. \nMake sure to use HOUS2020 for $200 discount!\nCertificate Program (if available) A Certificate of Completion indicating the total number of CEUs earned will be provided upon successful completion of the course. \n  \n  \nYou will be able to:   \n  \n\nCommunicate the latest trends in measurement and control\nRecognize the role of measurement and control in industrial processes\nCompare continuous\, batch\, and discrete control and how they are used in industry\nInterpret measurement and control terminology\nCompare the methods and devices used in temperature\, pressure\, level\, and flow measurement\nDescribe the operation and components of a feedback control loop\nIdentify the fundamental concepts of controller tuning\nCompare different control system architectures\, including single loop controllers\, distributed control systems (DCS)\, and programmable logic controllers (PLCs)\nApply ISA standards to interpret symbols and documentation  \n\n  \nYou will cover:  \n  \nPre-Exam \nStudents are asked to take the pre-exam\, which includes questions related to the subject matter areas. Answers will be provided for students to assess their knowledge\, prior to beginning the course material. \nWEEK 1 -Module 1: Concepts of Process Control \nWEEK 2 -Module 2: Documentation \nWEEK 3 -Modules 3 & 4: Industrial Measurement Systems (Parts I & II) \nWEEK 4 -Module 5: Temperature Measurement (Part I) \nWEEK 5 -Module 6: Temperature Measurement (Part II) & Module 7: Pressure Measurement \nWEEK 6 -Modules 8 & 9: Level Measurement (Parts I & II) \nWEEK 7 -Modules 10 & 11: Flow Measurement (Parts I & II) \nWEEK 8 -Modules 12 & 13: Control Valves (Parts I & II) \nWEEK 9 -Modules 14 & 15: Feedback Control Strategies (Parts I & II) \nWEEK 10 -Module 16: Advanced Control Strategies \nWEEK 11 -Module 17: Smart Field Devices & Module 18: Control System Hardware \nWEEK 12 -Final Examination
URL:https://www.houstonisa.org/event/fg05e-fundamentals-of-industrial-process-measurement-control-online/
CATEGORIES:Training,Technical-Training
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20210216T080000
DTEND;TZID=America/Chicago:20210508T170000
DTSTAMP:20210115T055142Z
CREATED:20210115T054149Z
LAST-MODIFIED:20210115T055142Z
UID:10000116-1613462400-1620493200@www.houstonisa.org
SUMMARY:Certified Control Systems Technician (CCST) Level I Review Course (TS00E - Online)
DESCRIPTION:Certification of Completion: A Certificate of Completion indicating the total number of CEUs earned will be provided upon successful completion of the course. \nMake sure to use HOUS2021 for $200 discount\nCCST—Special Bonus! \nTake this review course and schedule an electronic CCST exam on the date and at the location of your choosing—at no additional fee! That’s a $398 savings! The exam fee will be waived ONLY if you attend the review course AND you meet the CCST qualifications. You must submit a CCST application and your course registration form six (6) weeks prior to your course date to be eligible for this offer. \nISA’s CyberU online instructor-led training course offers the benefit of a high quality ISA training course with the added advantage of studying at your own pace in the office\, at home or while traveling. \nThis online course utilizes online training modules\, additional text materials\, online evaluations\, and email discussions. Students will have access via email to an instructor and have an opportunity to participate in live Q&A sessions with the instructor and other class participants. \nThis CyberU course runs for eleven (11) weeks. You will have access to various online modules including a web/audio session. Each module takes approximately 60 minutes. Your course syllabus will guide you through the course modules\, provide assignments\, and the schedule for live Q&A sessions. You will be able to access the modules 24 hours a day\, 7 days a week for the duration of the course. \n  \nDescription: \nThe course is a fast-paced review of the knowledge and practical skills necessary to install and maintain standard measurement and control instrumentation. It is intended for practicing technicians preparing for the ISA Certified Control Systems Technician® (CCST®) Level I exam. Practice certification-type exams and an explanation of the examination process are provided. \n  \nYou will be able to: \n\nCite principles and theory that explain measurement and control instrument functions\nDescribe procedures required to properly maintain the function of measurement and control instrumentation\nIdentify the procedures and safety requirements for loop checking and its purpose\nPerform calculations and other analysis of information related to the calibration and troubleshooting of measurement and control instruments and systems\nDescribe procedures required to safely start-up and shut-down a new or existing process\nReview normal tasks of process control technicians as outlined by the current CCST job task analysis.\nDefine the education\, experience\, and examination requirements for becoming a CCST\nIdentify important knowledge and skill requirements of a practicing CCST\nDescribe the procedures involved in taking the CCST Level I exam\nIdentify any need for further study or training in specific knowledge areas\nComplete simulated CCST Level I Practice Exams\n\n  \nYou will cover: \nEach course module has been pre-recorded by your instructor\, so that you can access on your schedule. Each module is a web/audio session that takes approximately 60 minutes. \nWeek/Module 1: Overview of CCST Certification/Concepts of Process Control \nWeek/Module 2: Domain 1 — Calibration\, Maintenance\, Repair and Troubleshooting \nWeek/Module 3: Domain 1 — Calibration\, Maintenance\, Repair and Troubleshooting \nWeek/Module 4: Domain 1 — Calibration\, Maintenance\, Repair and Troubleshooting \nWeek/Module 5: Domain 2 — Project Start-up\, Commissioning\, Loop-checking\, Project Organization and Planning \nWeek/Module 6: Domain 2 — Project Start-up\, Commissioning\, Loop-checking\, Project Organization and Planning \nWeek/Module 7: Domain 2 — Project Start-up\, Commissioning\, Loop-checking\, Project Organization and Planning \nWeek/Module 8: Domain 3 — Documentation \nWeek/Module 9: Domain 3 — Documentation \nWeek/Module 10: Domain 3 — Documentation \nWeek/Module 11: Final Exam \n  \nHomework Exercises: \n\nUnit conversion calculations\nCalibration documentation and analysis\nTrouble recognition and analysis\nISA CCST Level I practice exam questions\n\n  \nCourse Materials: \nISA Text Included: CCST® Study Guide Level IFeatures of ISA CyberU online course: \n  \nBook: \nThe Condensed Handbook of Measurement and Control\, Fourth Edition \nBy: N. E. Battikha \n  \nOnline Pre-recorded Course Modules \nYour instructor has pre-recorded each course module so that you can access the course presentations on your schedule. Each module is a web/audio session that takes approximately 60 minutes. \n  \nAsk the Expert \nInteract with your expert instructor via email throughout the course and through scheduled live Q&A sessions. You can expect a reply to your email within 24 hours. This email address is active during the entire course duration. \nThe Q&A sessions provide an opportunity for you and your classmates to speak one-on-one with the instructor. You will have an opportunity to ask any questions you may have about the course material and interact with your fellow classmates. \n  \nClass Discussions \nYou will be invited to subscribe to a course listserve that includes course participants. You can use this listserve to post questions and share experience relevant to the course with other class members. \n  \nCourse Assignments and Exams \n\nTake the course pre-test before you begin studying the course material to get a better understanding of areas that you will want to focus on more during the course.\nHomework assignments for all modules will be indicated on the syllabus. The homework assignments are designed to help expand your understanding of the course material.\nComplete the final exam for the course in order to receive Continuing Education Units (CEU) credit. The final exam will be taken and scored online. You must receive at least 80% on the course exam to receive CEU credit and certificate of completion.
URL:https://www.houstonisa.org/event/ts00e-ccst-level-i-review-course/
CATEGORIES:Training,CapCcst-ExamReview
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20210302
DTEND;VALUE=DATE:20210613
DTSTAMP:20210115T053911Z
CREATED:20200912T072629Z
LAST-MODIFIED:20210115T053911Z
UID:10000095-1614643200-1623542399@www.houstonisa.org
SUMMARY:TS03E Certified Control Systems Technician (CCST) Level III Exam Review Course E-Course
DESCRIPTION:Length: 15 Weeks\nCEU Credits: 3.2\nCertification of Completion: A Certificate of Completion indicating the total number of CEUs earned will be provided upon successful completion of the course. \nDescription: \nThis online course reviews the knowledge and skills areas included on the new Certified Control Systems Technician® (CCST®) Level III examination. The intent is to prepare an automation professional who meets the exam criteria to take the exam. The content is based on the latest Job Analysis Domains\, Tasks\, Knowledge Areas\, and Skill Areas developed\, and regularly reviewed and updated as the basis for the CCST certification exam. \nMake sure to use HOUS2021 for $200 discount\nCertificate Program (if available) Certified Control System Technician Certificate \nYou will be able to:   \n\nDefine the scope and format of the CCST Level III exam\nCompare process variable measurements and control valve selections\nDiscuss how the various types of control technologies are used in industrial automation\, including process control from basic to advanced control\, discrete\, batch\, motor and\, motion control\nDetermine the requirement for tuning and discuss tuning procedures\nIdentify the range of digital communications used in automation and how these are used in system integration\nExplain when safety instrumented systems (SISs) are needed and how they are specified\nApply the critical areas of regulatory procedures and project documentation\nInterpret the best practice methodology for troubleshooting automation projects\n\nYou will cover:  \nWeek 1: Review of Process Information\, Domain 1\, and Process Control Concepts \nWeek 2: Number Systems\, Instrument Performance\, and Calibration Equipment and Procedures \nWeek 3: Common Measurement Instruments \nWeek 4: Final Control Elements\, Domain 2\, and Feedback Control Strategies \nWeek 5: Advanced Control Strategies\, Loop Checking Concepts\, and Start-up Concerns \nWeek 6: Domain 3\, Symbols and Identification\, P&IDs\, and Other Project Documents \nWeek 7: Domain 4\, Troubleshooting\, and Installation in Hazardous Areas \nWeek 8: Instrument Maintenance and Installation Practices \nWeek 9: Tuning Methods\, and Project Management \nWeek 10: Risk Assessments \nWeek 11: Applicable Standards \nWeek 12: Programmable Electronic Systems \nWeek 13: Networking and Fieldbuses \nWeek 14: Cybersecurity \nWeek 15: Final Exam
URL:https://www.houstonisa.org/event/ts03e-certified-control-systems-technician-ccst-level-iii-exam-review-course-e-course/
CATEGORIES:Training,CapCcst-ExamReview
ORGANIZER;CN="Jacqueline Buskop":MAILTO:jbuskop@wesleyan.edu
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20210303T113000
DTEND;TZID=America/Chicago:20210303T123000
DTSTAMP:20210226T201124Z
CREATED:20210221T012519Z
LAST-MODIFIED:20210226T201124Z
UID:10000011-1614771000-1614774600@www.houstonisa.org
SUMMARY:Using Improved Tunable Diode Laser Technology to Increase Fired Heater Reliability
DESCRIPTION:INSTRUCTIONS:  \nDownload and install Zoom software if necessary \nRegister in advance for this meeting:\nhttps://us02web.zoom.us/meeting/register/tZEtcOyqpjgvE9JEuDoXnOHXhDEBqLomigOT \nAfter registering\, you will receive a confirmation email containing information about joining the meeting. \nYou may join the meeting starting at approximately 11:00 am for socializing and announcements \nAbstract: \nFired heaters\, used to heat process fluids\, are critical pieces of equipment used continuously in refining and petrochemical operations globally. Large periods of downtime for these assets can cause millions of dollars in loss and limit downstream production if there are reliability issues. A common cause of reliability issues is related to overheating the convection section of the fired heater to compensate for inefficiencies in how the radiant section is operated. Utilizing recent advancements in Tunable Diode Laser (TDL) measurement capabilities allows users a measurement capability which enables safely increasing efficiencies in the radiant section’s operation to maximize reliability and product throughput while decreasing environmental impact. Recent TDL technology advancements have revolutionized the industry by allowing end users to safely run their assets at their operational limits. \nPresenter: Donald Wyatt \nDonald Wyatt has worked in the field of Analytical Instrumentation and Process Analyzers for 25+ years. He graduated from Auburn University in 1993 with a BS in Chemical Engineering. He joined Fisher Rosemount right out of school as a technical sales person in their Analytical Division. Three years later he moved on to Analytical Specialties (ASI)\, an analyzer only manufacturer’s representative firm\, where he spent the next twelve years providing analytical solutions. While working at ASI he worked as a member of the team that developed a TDLS platform. He participated in two Department of Energy projects: “Tunable Diode Laser Sensor for Monitoring and Control of Harsh Combustion Environments”\, and “Advanced Combustion Diagnostics and Control for Furnaces\, Fired Heaters and Boilers”. In 2008 Yokogawa purchased Analytical Specialties. Donald spent the next seven years managing the newly formed Yokogawa Laser Analysis Division. In 2015 he moved to TechStar where he currently is in Business Development. His two primary responsibilities include instrumentation and automation project support for many Engineering firms in the greater Houston area and as a subject matter expert supporting Tunable Diode Laser Spectrometer (TDLS) analytical applications. \n \n 
URL:https://www.houstonisa.org/event/using-improved-tunable-diode-laser-technology-to-increase-fired-heater-reliability/
CATEGORIES:Event,ISA Houston Section Program
ORGANIZER;CN="Clifford D. Wuertz":MAILTO:cdwuertz@gmail.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20210322T080000
DTEND;TZID=America/Chicago:20210515T170000
DTSTAMP:20210122T091548Z
CREATED:20210122T090632Z
LAST-MODIFIED:20210122T091548Z
UID:10000022-1616400000-1621098000@www.houstonisa.org
SUMMARY:FG15E Developing & Applying Standard Instrumentation and Control Documentation Online
DESCRIPTION:Description: This course will present the methodology for the designing and developing control systems documentation. The development of piping and instrument diagrams (P&IDs) and related ISA drawings are emphasized. This course covers both the development and the reading/interpreting of these documents\, making it beneficial to engineers\, designers\, software programmers\, system integrators\, and technicians. \nMake sure to use HOUS2020 for $200 discount!\nCertificate Program (if available) A Certificate of Completion indicating the total number of CEUs earned will be provided upon successful completion of the course.ISA’s online instructor-assisted training courses offer the benefit of a high quality ISA training course with the added advantage of studying at your own pace in the office\, at home\, or while traveling. \n  \n You will be able to:   \n  \n\nDesign\, develop\, and interpret the documents used to define instruments and control systems for a typical project\, including P&IDs\, loop diagrams\, specification forms\, instrument lists\, logic diagrams\, installation details\, and location plans\nExplain the information included on each document\nPlan document development as it relates to project management\nApply ISA standards for symbols and terminology to documentation\nDescribe the relationship of ISO 9000\, OSHA process safety management (PSM)\, and API 750 to control systems documentation\n\n  \n  \n  \nYou will cover:  \n  \n\nP&IDs: Definition and Use | ISA Standard Symbols and Identification | Contents and Piping Information | Design and Construction | Developing from Flow Diagrams | Scheduling Considerations | Hazardous Area Considerations\nInstrument Lists: Definition and Use\nControl System Software: PLC/DCS Functional Requirement Documentation Development\nLogic Diagrams: Definition and Use | Symbology | Interpretation | ISA Standards\nInstallation Details: Use | Development | Materials of Construction | Valves | Scheduling\nLocation Plans: Purpose and Development | Structural Considerations | Electrical and Other Trays | Panel Location\nInstrument List: Specification Forms | An ISA20 Specification Form\nLoop Diagrams: Purpose | Interpretation | Development | ISA Standards | Scheduling Considerations\nControl Methods: Feedback | Feedforward | Ratio | Cascade | Control Valves\n\nStandards and Documentation: ISA5.1 – ISA5.6 | ISO 9000 | OSHA | Process Safety System Management | API 750
URL:https://www.houstonisa.org/event/fg15e-developing-applying-standard-instrumentation-and-control-documentation-online/
CATEGORIES:Training,Technical-Training
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20210407T113000
DTEND;TZID=America/Chicago:20210407T123000
DTSTAMP:20210325T050937Z
CREATED:20210322T052631Z
LAST-MODIFIED:20210325T050937Z
UID:10000013-1617795000-1617798600@www.houstonisa.org
SUMMARY:Gas Phase Compensation (GPC) in Level Applications
DESCRIPTION:INSTRUCTIONS:  \nDownload and install Zoom software if necessary \nRegister in advance for this meeting: \nhttps://us02web.zoom.us/meeting/register/tZYrcOGuqjssG9X1cr6tF0F7L45zIg5Z9dGW \nAfter registering\, you will receive a confirmation email containing information about joining the meeting. \nYou may join the meeting starting at approximately 11:00 am for socializing and announcements \nThe presentation will begin at 11:30 am \nABSTRACT:  \nThis discussion will center around using Guided Wave Radars in “Polar Gas” applications such as steam boilers\, ammonia and high pressure Hydrogen applications. We will discuss topics such as pulse velocity corrections vs. measuring the GPC correction methods as well as other techniques that are common in these types of applications such as differential pressure and displacer instrumentation. \nPRESENTER: \nChris Fournet\nTrainer / Senior Application Specialist \n \nA professional with over 31 years of instrumentation experience\, Chris Fournet will excite you with his wit and wisdom. Instrumentation is not only a job for Chris but a passion. He loves all aspects of the industry and enjoys helping the sales team and customers solve problems. Chris graduated with a Associate of Applied Science in Electronics and Instrumentation from Lamar University. Additionally\, he is certified from the Instrument Society of America(ISA) Certified Control Systems Technician (CCST) and earned Endress+Hauser’s Black Belt in Level\, Pressure\, Temperature and Service. He has obtained much of his experience working 22 years for Motiva as well as past positions with Texaco Research and Texaco Chemical. In 2014 he became part of the Vector CAG family as Senior Application Specialist. His Vector University training focus is on Instrument 101/102\, Level 101/102\, Pressure\, Temperature and Williamson Flare Products. He also provides other technical support to our sales team and customers. In his free time\, he enjoys playing in the dirt; riding dirt bikes\, 4 wheelers and side by sides.
URL:https://www.houstonisa.org/event/gas-phase-compensation-gpc-in-level-applications/
CATEGORIES:Event,ISA Houston Section Program
ORGANIZER;CN="Clifford D. Wuertz":MAILTO:cdwuertz@gmail.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20210409T083000
DTEND;TZID=America/Chicago:20210409T140000
DTSTAMP:20210318T044139Z
CREATED:20201201T082350Z
LAST-MODIFIED:20210318T044139Z
UID:10000115-1617957000-1617976800@www.houstonisa.org
SUMMARY:2021 ISA Houston Section Golf Tournament
DESCRIPTION:ISA Annual Scholarship Golf Tournament is happening Friday\, April 9\, 2021\, @ The Clubs of Kingwood \n8:30 AM shotgun start! \nSee below for Player and Sponsorship options \nFor further information contact Amanda Hardy 281-928-0462 or amanda@functionzinc.com or Rusty Darsey 832-392-0762 or rustyd@safeengr.com \n \n(from previous golf tournament) \n2021 ISA Houston Section Golf Tournament Player Pricing:\nFoursome $540.00 Includes: \n\nGoodie Bag\nShared Cart\nRange Balls\n18 Hole Green Fee\nGrab and go breakfast\nAwards Luncheon\n\nIndividual $135.00 Includes: \n\nGoodie Bag\nShared Cart\nRange Balls\n18 Hole Green Fee\nGrab and go breakfast\nAwards Luncheon\n\n2021 ISA Houston Section Golf Tournament Sponsorship Opportunities:\nTitle Sponsor $3000.00-(SOLD OUT) \n\nIncludes Two (2) Four person teams\nCompany Logo on Balls in the golfers’ bags\, up to 120 golfers\nTitle Sponsors logo will be reference in all promotional materials including: ISA HS Monthly Meetings\, website\, LinkedIn & email blasts\nNine (9) premium hole sponsorships with signage at tournament\nExhibit on Course set up option\nReserved seating table at Awards Luncheon\nRecognition & award presentation at ceremony\nLogo on event Signage\n\nGolf Cart Sponsor $2000.00(SOLD OUT) \n\nIncludes One (1) Four person team\nYour organizations logo on all carts\nGolf Cart Sponsors logo will be reference in all promotional materials including: ISA HS Monthly Meetings\, website\, LinkedIn & email blast\nReserved seating table at awards luncheon\nExhibit on Course set up option\nRecognition & award presentation at ceremony\n\n Beverage Cart Sponsors $500.00(SOLD OUT) \n\nCompany Logo on Beverage Carts\nBeverage Cart Sponsors logo will be reference in all promotional materials including: ISA HS Monthly Meetings\, website\, LinkedIn & email blasts\nRecognition at Awards Ceremony\nEvent Signage\n\nExhibit on Course $600.00 \n\nYour organizations logo on hole sign\nDisplay on Course you may bring your company tent\, products and give-a-ways\, food non-alcoholic beverages. Alcohol must be purchased through Kingwood Country Club.\nExhibit Sponsors logo will be reference in all promotional materials including: ISA HS Monthly Meetings\, website\, LinkedIn & email blasts\nReserved seating table at awards luncheon & lunch provide for your team managing the tent\nRecognition at Awards Ceremony\n\n Bag Sponsor$1000.00(SOLDOUT) \n\nCompany Logo on all Ditty Bags\nSponsors logo will be reference in all promotional materials including: ISA HS Monthly Meetings\, website\, LinkedIn & email blasts\nReserved seating table at awards luncheon and up to 4 awards luncheon networking passes\nRecognition at Awards Ceremony\n\nMulligan Sponsor $300.00 \n\nCompany Logo on all Mulligan cards purchased by golf teams\nSponsors logo will be reference in all promotional materials including: ISA HS Monthly Meetings\, website\, LinkedIn & email blasts\nRecognition at Awards Ceremony\n\nPutting Contest Sponsor$200.00+ Donation for Contest item (SOLD OUT) \n\nCompany Logo signage at event contest area\nSponsors logo will be reference in all promotional materials including: ISA HS Monthly Meetings\, website\, LinkedIn & email blasts\nPicture of winning players announced in newsletter with your company logo\n\n Scoreboard Sponsor$150.00(SOLD OUT) \n\nCompany Logo signage at scoreboard area\nSponsors logo will be reference in all promotional materials including: ISA HS Monthly Meetings\, website\, LinkedIn & email blasts\nRecognition at Awards Ceremony\nPicture of winning players announced in newsletter with your company logo\n\n Longest Drive Sponsor $150.00(SOLD OUT) \n\nCompany Logo signage at longest drive hole\nSponsors logo will be reference in all promotional materials including: ISA HS Monthly Meetings\, website\, LinkedIn & email blasts\nRecognition at Awards Ceremony\nPicture of winning players announced in newsletter with your company logo\n\n Driving Range $150.00 (SOLD OUT) \n\nCompany Logo signage at driving range area\nSponsors logo will be reference in all promotional materials including: ISA HS Monthly Meetings\, website\, LinkedIn & email blasts\nRecognition at Awards Ceremony\n\n Hole Sponsor $150.00 \n\nCompany Logo signage at hole\nSponsors logo will be reference in all promotional materials including: ISA HS Monthly Meetings\, website\, LinkedIn & email blasts\nRecognition at Awards Ceremony
URL:https://www.houstonisa.org/event/2021-isa-houston-section-golf-tournament/
LOCATION:The Clubs of Kingwood – Kingwood Clubhouse\, 1700 Lake Kingwood Trail\, Kingwood\, TX\, 77339\, United States
CATEGORIES:Event,ISA Houston Section Fundraiser
ATTACH;FMTTYPE=image/jpeg:https://www.houstonisa.org/wp-content/uploads/2019/09/golf-1408662.jpg
ORGANIZER;CN="Amanda Hardy":MAILTO:amanda@functionzinc.com
GEO:30.0399681;-95.1987045
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=The Clubs of Kingwood – Kingwood Clubhouse 1700 Lake Kingwood Trail Kingwood TX 77339 United States;X-APPLE-RADIUS=500;X-TITLE=1700 Lake Kingwood Trail:geo:-95.1987045,30.0399681
END:VEVENT
END:VCALENDAR